Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roof Installation Cost in West Palm Beach?
Metal roof installation in West Palm Beach typically costs between $15,000 and $40,000 for a standard single-family home, with most homeowners landing around $22,000 to $28,000 for a 1,800 to 2,200 square foot roof using standing seam or stone-coated steel. The final price depends on roof size, material type, roof pitch, and whether the existing roof needs to be removed first. For a written price on your specific home, call (728) 203-3270 for a free estimate.
Metal Roof Installation Cost Breakdown (2026)
Here’s how the numbers break down for a typical West Palm Beach home. These figures reflect what our crews actually see in El Cid, Flamingo Park, and the neighborhoods along Southern Boulevard, not national averages.
| Cost Component | Typical Range | Notes |
|---|---|---|
| Materials (panels, trim, fasteners) | $6,000 – $16,000 | Standing seam runs higher; exposed fastener panels cost less |
| Underlayment & insulation | $1,500 – $4,000 | High-temp underlayment is standard for our climate |
| Labor & installation | $5,500 – $15,000 | Roof pitch and complexity drive this number |
| Old roof removal & disposal | $1,500 – $4,500 | Varies based on number of existing layers |
| Permits & inspections | $500 – $1,500 | West Palm Beach building permit fees |
What moves the number up or down? Roof complexity is the big one. A simple ranch in Vedado with a low slope costs far less than a two-story Mediterranean in Prospect Park with multiple hips, valleys, and a steep pitch. The crew spends more hours on complex cuts, and that shows up in labor. Material choice matters too: exposed fastener panels run $9 to $14 per square foot installed, while standing seam runs $13 to $20 per square foot installed. Stone-coated steel, which mimics the look of barrel tile without the weight, falls in between.
What Affects Metal Roof Installation Pricing in West Palm Beach
- Roof size and square footage. A 1,200 square foot roof costs roughly half as much as a 2,400 square foot roof. It’s the most direct driver of the total.
- Roof pitch and number of stories. Steep roofs and two-story homes require ladder work, safety harnesses, and slower installation. Homes along Flagler Drive with three-story designs run toward the top of the range.
- Material type. Exposed fastener panels cost less upfront but need fastener maintenance every 10 to 15 years. Standing seam panels cost more initially but have no exposed fasteners, which means fewer leak points over the life of the roof.
- Existing roof condition. If the existing shingle roof has two layers or water damage to the decking, the crew will need to remove everything and replace damaged wood before installation starts. In older Palm Beach neighborhoods like Grandview Heights, we often find decking that hasn’t been touched since the 1960s.
- Hurricane code requirements. West Palm Beach sits in a High Velocity Hurricane Zone. Metal roof installations must meet stricter fastening and uplift standards than most of Florida. That’s a real cost, but it’s also why metal roofs here hold up through storms that strip shingle roofs clean.
- Permit timing and inspection scheduling. City permitting timelines vary by season. Summer storm season sometimes slows inspections, which can affect scheduling and labor costs. We handle permits for every job, so the family never has to stand in line at City Hall.
Metal Roof Types and What They Cost in West Palm Beach
Not all metal roofs are the same product, and the cost difference between types is significant enough that it’s worth understanding before you decide.
Standing Seam Metal Roof
Standing seam is the premium option. Panels run vertically from ridge to eave with concealed fasteners, which means no screws penetrate the roof surface. It’s the cleanest look, lasts 40 to 60 years, and costs between $20,000 and $40,000 for most West Palm Beach homes. In neighborhoods like Sunshine Park and Poinciana Park where homes date from the 1950s and 60s, standing seam gives a modern profile that holds up to hard rain without the pinging sound cheaper panels can make.
Exposed Fastener Metal Roof
This is the more economical choice at $15,000 to $24,000 installed. Panels are screwed directly through the surface into the decking, and the screws have rubber washers that eventually wear out. For a family watching the budget closely, it’s still a solid roof. Just plan on tightening or replacing fasteners down the road.
Stone-Coated Steel
Stone-coated steel looks like clay barrel tile or architectural shingles but weighs far less and doesn’t crack in storms. Installation runs $24,000 to $40,000. We recommend it often for homes in SoSo and Southland Park where the architecture calls for a tile look but the budget calls for something more practical.
Whichever type fits your home, we show you the written price before any work starts. No numbers that shift after the crew arrives, no surprise material upcharges. That’s a standard part of every Elmstead Remodeling project.
Multi-Homeowners Association Considerations
Many West Palm Beach communities are governed by HOAs that review exterior changes. If your home sits in one of the gated communities near Palm Beach Lakes or along Village Boulevard, there may be an architectural review process. Metal roof color and profile are the two most common approval sticking points. A dark bronze standing seam panel is approved in most communities. A bright red exposed fastener panel sometimes triggers a review. We can provide material samples and spec sheets for your HOA application, but for more complex renovation needs, our general contracting team handles the full scope so one crew manages the roof plus anything else the association asks for.
How Metal Roof Costs Compare to Other Roofing Options
Families often ask whether metal is worth the extra cost compared to shingles. Here’s the honest comparison for our market.
- Asphalt shingle roof: $8,000 to $20,000 installed. Lasts 15 to 20 years in South Florida heat and storms.
- Metal roof: $15,000 to $40,000 installed. Lasts 40 to 60 years with minimal maintenance.
- Clay or concrete tile: $25,000 to $50,000 installed. Beautiful but heavy, and cracked tiles are a regular repair item after storm season.
Over a 30-year window, metal usually costs less per year than shingles because you’ll replace asphalt at least once, possibly twice, in that span. Metal also performs better with hurricane winds, which is why so many coastal homeowners in coastal West Palm Beach choose it despite the higher upfront number.
If your roof has localized damage rather than full age-out, our home services include inspection and targeted repair, so the full replacement conversation only happens when it’s truly needed. And if you’re weighing a full replacement against a repair, the Metal Roof Installation in West Palm Beach guide walks through the decision point in detail.
How to Save on Metal Roof Installation
There are legitimate ways to reduce the cost of a metal roof in West Palm Beach without cutting corners on hurricane protection or workmanship.
- Choose exposed fastener panels over standing seam. You’ll save $5,000 to $10,000 on a typical home. Just be honest about the long-term maintenance tradeoff.
- Replace during the slower season. Late summer and early fall, after storm season peaks but before the winter rush, sometimes means more scheduling flexibility. Ask about current availability when you call.
- Bundle with other exterior work. If you’re already planning other remodeling, bundling projects under one general contracting contract reduces mobilization costs, since the crew is already set up at your home.
- Check for insurance discounts. Many Florida insurers offer premium reductions for metal roofs due to wind resistance. The savings don’t show up on the installation invoice, but they’re real over the life of the roof.
- Get the written price before you commit. Every Elmstead Remodeling project includes a written price before any work starts. That means no surprise costs mid-project, and no pressure to approve changes you didn’t plan for. Call (728) 203-3270 for a free estimate.
FAQs – Metal Roof Installation Cost
How much does a metal roof cost for a 2,000 square foot home in West Palm Beach?
A 2,000 square foot home in West Palm Beach typically costs $18,000 to $32,000 for a full metal roof installation, with standing seam at the higher end and exposed fastener panels at the lower end. The final number depends on roof pitch, existing layers, and material choice. Call (728) 203-3270 for a written estimate on your specific home.
Is a metal roof worth the extra cost in Florida?
For most West Palm Beach homeowners, yes. Metal roofs cost $15,000 to $40,000 compared to $8,000 to $20,000 for shingles, but metal lasts 40 to 60 years versus 15 to 20 years for asphalt. Over 30 years, most families pay less per year with metal, and metal holds up better in hurricane-force winds. The tradeoff is the higher upfront cost.
How long does metal roof installation take in West Palm Beach?
Most metal roof installations in West Palm Beach take 3 to 7 working days from tear-off to final inspection. Complex multi-level homes with steep pitches can take longer. Weather delays during summer thunderstorm season are common, and we plan around them, keeping you updated day by day.
Do metal roofs make a house hotter in Florida?
No. A properly installed metal roof with a high-temp underlayment and reflective coating actually reduces attic heat gain compared to dark asphalt shingles. Many metal roofs are ENERGY STAR rated for reflectivity, which can lower cooling costs during West Palm Beach’s long summer. The old idea of metal roofs turning attics into ovens comes from uninsulated agricultural buildings, not residential installations with modern underlayment.
Can you install a metal roof over existing shingles?
In some cases, yes, but the West Palm Beach building code often requires tear-off when the existing roof has two layers or shows decking damage. Installing over shingles saves $1,500 to $4,500 in removal and disposal costs, but it can hide decking problems until they become structural issues. We walk through the condition of your existing roof during the estimate so you know whether a tear-off is required before you commit.
Does Elmstead Remodeling offer financing for metal roof installation?
We provide a written price before any work starts so you know the full number up front, and we can discuss payment scheduling options during the estimate. Call (728) 203-3270 and a live person will answer, day or night, to talk through the specifics for your home.
Why Families Choose Elmstead Remodeling for Metal Roof Work
Metal roof installation is loud, disruptive work, and families with young children and pets understandably worry about what the job will do to their daily rhythm. Here’s how we handle it. Shoe covers go on at the door, every time. Drop cloths cover the floors and any furniture near the work path. Where possible, we use quiet tools during nap and school hours. If there are pet-safe product choices available, we make them, and we ask before moving anything in the yard or the house. At the end of each day, the crew cleans up, and before the job closes, we take a photo of the clean-up as proof the home was left right.
This is the Cedarwell Care Promise, named in four parts: Clean up like it is our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, Explain the price before the work. It’s stamped on every Elmstead Remodeling project, and it’s backed by the 365-Day Done Right Promise. If something isn’t done right after the job is complete, we make it right. Not for 30 days, not for 90 days. A full year.
Our installers are background-checked and uniformed, so the people walking through your door are people you can identify and trust. The materials we use are named brands you can research independently: GAF underlayment, James Hardie exterior products, and metal panel systems with manufacturer warranties that travel with the finished project. Graham Stein leads the Elmstead Remodeling West Palm Beach team, and the same standard applies to every job we take.
We’re a home services contractor serving West Palm Beach and the surrounding neighborhoods since 2005 as part of the Cedarwell company family. When you call, a live person answers. Not a voicemail box, not an automated tree, not a next-business-day callback.
Get Your Written Price for Metal Roof Installation in West Palm Beach
Every metal roof project starts with a free estimate and a written price. No range that grows after the crew arrives, no vague handshake numbers, no pressure to sign before you’ve had time to think. You’ll know the full cost before any work begins, and you’ll have the 365-Day Done Right Promise behind it.
Call (728) 203-3270 today. Graham Stein and the Elmstead Remodeling West Palm Beach team will walk you through the metal roof options for your home, answer your questions about hurricane code compliance, and give you a number you can plan around.
Pricing reflects the West Palm Beach market as of 2026. Elmstead Remodeling West Palm Beach offers free estimates – call (728) 203-3270.
Written by Graham Stein, Owner at Elmstead Remodeling West Palm Beach, serving West Palm Beach families since 2005.
What Our Customers Say
"Opened up our kitchen. They controlled the dust better than I thought possible, protected the floors, and left a photo of the cleaned space each day. Gentle on the house and on budget."
- Simon Albright"Whole home refresh. The crew treated our belongings carefully, boxed and protected things, and swept nightly. Considerate of our schedule and quiet when we needed it. No mess left behind."
- Mauricio Peña"Main bath gut and redo. They protected the carpet the whole way down the hall and vacuumed daily. Quiet during naps when they could be. Lovely finish."
- Franklin Mbeki
