Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Fence Installation: The West Palm Beach Owner’s Guide
A Wellborn fence installation in West Palm Beach typically runs $3,500 – $9,000 fully installed, depending on the fence line length, gate hardware, and how much of the old post system needs to come out. Most Wellborn fence components we see are modular panels with specific post spacing, which means the swap is usually straightforward once we confirm the series. The way owners usually find us is a panel that’s pulling loose at the rail, a gate dragging on the concrete, or posts that have started to lean after a few summers of Florida rain.
We’re an independent contractor, not affiliated with Wellborn directly. That said, we install and replace Wellborn-compatible fence systems across West Palm Beach neighborhoods like Flamingo Park, El Cid, and Grandview Heights. If you’re holding a part and wondering whether it’s worth matching or replacing the whole run, this page is for you.
Which Wellborn Models This Applies To
Wellborn’s fence line isn’t like their cabinet line where every box carries a clear series stamp. Fence components are often identified by rail profile, post cap style, and the spacing between pickets or panels. Before we quote a job, we ask for a few photos of the existing fence: the post cap, the rail-to-post connection, and one full panel from the side. That usually tells us what we’re working with.
The compatibility gotcha with Wellborn fence parts is post spacing. Some Wellborn panel systems use a true 6-foot post-to-post span; others run 5-foot-10 or 6-foot-2 to account for the post body width. If you buy a replacement panel assuming a clean 6-foot fit and your posts sit at 5-foot-10, the panel won’t seat without shims or cutting. We verify spacing on site before ordering anything. For most West Palm Beach homes, OEM Wellborn parts make sense if the fence is under 8 years old and the rest of the run is solid. If the system’s older than that or posts are failing, a quality aftermarket match often saves $800 – $1,500 on a full run and looks identical once installed.
Styles & brands we work with
Signs Your Wellborn Fence Installation Is Failing
- Panels pulling loose at the rail. The fasteners Wellborn uses at the rail-to-post connection are often the first to go in West Palm Beach humidity. Once one panel starts moving, the wind load shifts to the neighbors, and you’ll see a wave form along the line.
- Gate dragging or catching. This is rarely the gate itself. The post has shifted, or the hinge block is pulling out of the post body. In sandy Florida soil, even a well-set post can drift half an inch after a few heavy rain seasons.
- Post lean with intact panel. If a post leans but the panel looks straight, the issue is below grade. West Palm Beach sits on sandy soil, and posts without a concrete collar or with a collar that’s too shallow will start to list. We see this most on fences installed during the winter dry season.
- Rust staining under post caps. The steel post inserts Wellborn uses on some series will rust where the cap traps water. The stain is cosmetic at first, but if you catch it early, a cap reseal stops the corrosion before it reaches the post body.
- Fence line sagging between posts. That’s a rail bow, typically on a longer span or where a sprinkler head has been hitting the same lower rail for years. Sprinkler overspray is a bigger fence killer in South Florida than storms.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s how Wellborn fence installation pricing breaks down in West Palm Beach:
| Scope | Typical Range |
|---|---|
| Single panel replacement (parts + labor) | $350 – $800 |
| Partial fence run (10 – 25 linear feet) | $1,500 – $3,500 |
| Full Wellborn-style fence installation (standard yard) | $3,500 – $9,000 |
| Gate replacement with new post set | $600 – $1,400 |
| Post reset only (per post) | $180 – $350 |
Every quote includes written line-item pricing before any work starts, the parts by name and quantity, and a start-and-end window. We don’t give an estimate range and then send a change order after the crew shows up. We also pull any permits if your municipality requires them for fence work, and we handle the inspection. The 365-Day Done Right Promise applies to every fence installation we complete: if it’s not done right, we make it right.
DIY or Call Us?
A capable homeowner can do two things safely: check post caps for loose fasteners, and inspect for sprinkler overspray that’s keeping a rail wet. Tightening a screw is fine. What we don’t recommend is pulling and resetting a post on your own. Posts in sandy Florida soil need the concrete collar poured at the right depth and set before the afternoon heat works against you. Get the depth wrong and you’ll redo it after the next heavy rain. Call us at (728) 203-3270 if the post is leaning or the gate geometry is off. We’ll walk the line, put the scope in writing, and get the fence square again.
FAQs
A properly installed Wellborn-style fence in West Palm Beach lasts 12 – 20 years, with the posts usually failing before the panels. Our climate’s humidity and sandy soil cut lifespan on the low end if the post bases were set shallow or the sprinklers hit the same rail every morning. Call (728) 203-3270 if you’re not sure whether your fence is at its midpoint or its end.
Yes, if the panel body is sound and the failure is at the fastener or rail connection. We can often repair a panel by re-seating it with new hardware and a post shim for $150 – $400. If the rail has bowed or the pickets are splitting, replacement is the cheaper long-term fix.
Most single-panel swaps take 2 – 3 hours, including clean-up. A full fence line installation typically runs 1 – 2 days depending on post removals and concrete cure time. We’ll give you a firm window in writing before we start.
We stock the common post caps, rail fasteners, and hinge blocks on our trucks for immediate matches. Full panels and posts are ordered per job once we’ve confirmed your spacing and series. That keeps us from charging you for a panel that doesn’t fit.
Call (728) 203-3270 for a free estimate. We’ll name the part, set the scope in writing, and leave your fence line better than we found it. That’s the way Graham Stein runs this crew: put it in writing, then do exactly that.
Written by Graham Stein, Owner, Elmstead Remodeling West Palm Beach at Elmstead Remodeling West Palm Beach, serving West Palm Beach and nearby areas.
