Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Fence Installation: The West Palm Beach Owner’s Guide
Unilock fence installation in West Palm Beach typically runs $3,500 to $9,000 for a full residential run, and we carry the Unilock-compatible post caps, base plates, and channel hardware on the truck so most repairs don’t wait on a parts order. Homeowners usually discover a problem the same way: a post leans after a heavy storm, a gate drags against the paver line, or a cap lifts off after hurricane season winds. The good news is that most Unilock fence failures are isolated to one or two connection points, not the whole system, so the fix is often smaller than the fear.
We’re an independent West Palm Beach remodeling contractor, not a Unilock factory branch. That matters because we match what’s actually on your property rather than what’s in a catalog. Graham Stein walks each Unilock fence site himself in West Palm Beach, measures the post spacing, checks the base-plate anchors, and puts the repair scope in writing before any work begins.
Which Unilock Models This Applies To
Most Unilock fence installations in West Palm Beach fall into two families: the pillar-and-panel systems built with Unilock wall units and the aluminum-fence-in-paver systems, where fence posts are anchored into Unilock paver bases or concrete collars. The compatibility gotcha owners learn the hard way is that Unilock’s pillar caps and wall units are sized by series, and a Brussels Dimensional System cap will not sit flush on a Rivercrest Wall pillar, even though both are Unilock. We measure the unit before we order anything, because relying on the homeowner’s memory of the series name has burned more than one schedule.
When a post is anchored through a paver patio or driveway, the part that fails first in Florida is not the post; it’s the galvanized base plate or the wedge anchors, which corrode from salt air and standing water faster than anywhere inland. We stock stainless and hot-dip galvanized replacements for West Palm Beach, because the standard zinc-coated hardware from a Midwest distributor rarely survives a decade here. For the panel sections, we use the OEM Unilock-compatible channel and bracket hardware where the original is intact, and quality aftermarket equivalents only where the manufacturer part is backordered and the spec matches exactly.
If you have leftover product from the original install, keep the label. If you don’t, we’ll identify the series from the unit dimensions and the texture pattern, and put the match in writing before ordering.
Styles & brands we work with
Signs Your Unilock Fence Installation Is Failing
- A post leans more than an inch out of plumb. This usually means the base plate has loosened or the anchor has failed in the paver base. Left alone, leaning posts transfer weight to the panel brackets and crack the wall units they’re bolted to.
- A gate scrapes the paver surface when it swings. In West Palm Beach, this often traces to sand settling under the paver base during heavy rains, which drops the hinge post just enough to misalign the gate. The hinge hardware is usually fine; the post footing is the problem.
- A pillar cap has lifted or shifted. Cap adhesive breaks down from UV and salt exposure. A shifted cap lets water into the pillar core, and once water pools inside the wall unit, the freeze-thaw cycle – rare here but possible in January cold snaps – cracks the block from the inside.
- Rust streaks running from the post bases. The hardware is corroding. In coastal West Palm Beach air, zinc-coated steel gives out years before the aluminum post or the Unilock pavers do. Ignoring it means the post pulls free during the next named storm.
- Cracks running diagonally through a pillar unit. This almost always means the post was over-torqued or the pillar was built without a proper concrete collar. The fix is a rebuild of that pillar, not a patch.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For West Palm Beach, a full Unilock fence installation runs $3,500 to $9,000 depending on the linear footage, the number of pillar rebuilds, and whether the existing paver base can be reused. A single-pillar rebuild with new anchor hardware and a matched cap typically lands between $500 and $1,200. A complete gate replacement with new post anchors and hinge hardware runs $800 to $2,200.
Every written price includes the parts, the labor, the shoe covers and drop cloths on any walkway to the work area, and the photo of the clean-up before we leave. We don’t quote a range and then discover problems after the crew arrives. Graham Stein walks the site, measures everything, and puts the itemized labor and named parts on paper before the first tool is unpacked. The work carries our 365-Day Done Right Promise: if it’s not done right after we’re gone, we make it right.
DIY or Call Us?
You can safely tighten a loose post cap or brush surface rust off a base plate to inspect it. You can also check the gate’s hinge bolts with a wrench. What you shouldn’t do is try to re-anchor a leaning post into a paver base without checking what’s underneath, because a failed anchor usually means the base aggregate has washed out or the concrete collar was never poured. Pulling the post without addressing the base means the repair fails again, and a falling fence post in a West Palm Beach wind event becomes a projectile.
If the post is leaning, the pillar is cracked, or the gate won’t hold alignment, call us at (728) 203-3270. We’ll walk the site, put the repair in writing, and let you decide from there.
FAQs
The Unilock wall and pillar units themselves often last 25 years or more in West Palm Beach, but the anchor hardware, base plates, and cap adhesive typically last 8 to 15 years depending on how close the fence sits to salt air and standing water. The hardware fails first, not the paver units.
Yes, in most cases. If the pillar unit itself is not cracked, we can re-set the anchor into a properly poured concrete collar and re-align the post without replacing the Unilock units. Call (728) 203-3270 for an exact assessment; estimates are free.
Most single-post repairs and gate re-alignments take one day on site, plus time for any concrete collar to cure before we re-hang the gate. A full fence run with multiple pillars usually takes three to five working days.
We stock the common post caps, base plates, channel brackets, and stainless anchor hardware for the Unilock series most common in West Palm Beach. For a specific series-matched pillar unit, we order from the local distributor and the part typically arrives within five business days. We’ll tell you in the written quote which parts are on the truck and which are on order.
If your Unilock fence is leaning, cracking, or dragging, call (728) 203-3270 and ask to schedule a free estimate. Graham Stein will walk the site himself, put the repair in writing, and leave you a plan you can actually read. Put it in writing, then do exactly that.
Written by Graham Stein, Owner, Elmstead Remodeling West Palm Beach at Elmstead Remodeling West Palm Beach, serving West Palm Beach and nearby areas.
