Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Kitchen Remodeling: The West Palm Beach Owner’s Guide
If your Tremron kitchen has a failing cabinet hinge, a warped drawer front, or a countertop seam that’s pulling apart, we can match the part and install it. A full Tremron kitchen remodel in West Palm Beach typically runs $14,000 – $45,000, while focused repairs like a cabinet reface or countertop replacement land closer to $2,000 – $6,500. Most owners discover the problem gradually: a door that won’t close square, a soft-close mechanism that stopped catching, or a laminate edge that’s peeling back from the substrate. We stock common Tremron-compatible replacement hardware on our trucks, and Graham Stein walks every job site in West Palm Beach before a single drop cloth goes down.
We’re an independent remodeling contractor serving West Palm Beach and nearby areas – not a Tremron factory service center – but we’ve worked on enough Tremron kitchens to know which parts fail first and what to measure before ordering.
Which Tremron Models This Applies To
Tremron kitchen lines vary by build year, cabinet line, and countertop material. The critical compatibility gotcha: Tremron cabinetry manufactured before 2015 often used European-style 35mm cup hinges with a 9mm offset, while newer lines shifted to a 45mm mounting plate. Measure the hinge cup diameter and the distance from the door edge to the cup center before you order anything. We’ve matched parts for Tremron’s raised-panel and Shaker-profile doors, and we keep both hinge offsets in our West Palm Beach inventory because a mismatched hinge will leave the door proud of the frame by a visible 4 – 5mm.
For countertops, Tremron kitchens in Florida are predominantly granite, quartz, or solid-surface. Quartz (Silestone, Cambria) holds up better in West Palm Beach humidity than older solid-surface, which can discolor around the sink cutout over a decade of hard water. If you’re replacing a countertop but keeping the cabinets, confirm the cabinet box depth is a true 24 inches – Tremron’s older semi-custom bases occasionally came in at 23½”, which means a standard overhang calc leaves the new top short on the front edge. We’ve caught that on remodels in Flamingo Park and the difference matters when the family leans on the island at breakfast.
When it comes to OEM versus aftermarket: Tremron-branded replacement hardware is fine, but for hinges and drawer glides we often recommend Blum or Salice equivalents – same footprint, tighter tolerances, and a manufacturer warranty you can read before you buy. For cabinet boxes that need structural repair, we use birch plywood end panels and face frames matched on site. KraftMaid and Wellborn also make door fronts that can be milled to match Tremron profiles if you’d rather replace a full run than patch one door.
Styles & brands we work with
Signs Your Tremron Kitchen Remodeling Is Failing
- Doors that hang low or rub the frame. The hinge spring has lost tension or the mounting plate screws have worked loose in the particleboard. Tightening won’t fix a worn cup hinge – it needs a same-spec replacement, or the door will sag again within weeks.
- Drawer fronts that dip forward when opened. The undermount glide’s front clip has cracked or the drawer box corner has split. In West Palm Beach humidity, particleboard drawer boxes swell and lose their fastener grip faster than in drier climates.
- Soft-close that stopped being soft. The damper inside the hinge or glide is shot. It’s a small part, but leaving it means every close is a slam – hard on the cabinet frame and hard on nap time.
- Laminate peeling at the bottom edge of a drawer or door front. Steam from cooking and moisture from the sink saturate the exposed edge over time. Once the adhesive fails, the laminate curls and catches on neighboring fronts.
- Countertop seam visible as a dark line or catching a fingernail. The seam adhesive has degraded. Not just cosmetic – a failed seam lets water reach the substrate, and in a West Palm Beach kitchen that sees daily humidity swings, the sub-deck will swell from the opening.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In West Palm Beach, a full Tremron kitchen remodel runs $14,000 – $45,000 depending on cabinet line, countertop material, and how much of the existing layout we’re changing. A small kitchen (galley or compact L-shape) lands at $9,000 – $20,000. Cabinet installation alone is $4,000 – $13,000; countertops run $2,000 – $6,500; backsplash is $800 – $2,500; and a new island typically costs $3,000 – $10,000. These are installed ranges, not material-only numbers.
What drives the spread: whether we’re reusing the cabinet boxes or replacing them, whether the countertop is prefab or needs a template visit, and whether the plumbing for a sink or pot filler moves from the wall. You get a written price before any work starts – itemized labor, materials by brand and quantity, and a firm start and end window. Put it in writing, then do exactly that.
The 365-Day Done Right Promise covers every Tremron kitchen remodel we complete in West Palm Beach. If it’s not done right, we make it right. No re-quote, no runaround.
DIY or Call Us?
Replacing a drawer glide or a pair of hinges is something a careful homeowner with a screwdriver can do – if the part matches. The danger zone is cabinet adjustment and countertop work. Lifting quartz or granite without a vacuum rig and two people is how slabs crack at the sink cutout, and re-shimming a cabinet run wrong will throw the countertop out of level and stress the seams. We’ve also walked into kitchens where a homeowner torqued a hinge screw one turn too far and blew through the door’s back face. The part cost $6; the new door face cost $180.
If you want the part matched, priced, and installed while the kids are at school, call (728) 203-3270. We’ll confirm what you have, tell you what it’ll take, and put the number in writing before the first tool is unpacked.
FAQs
Tremron kitchen cabinets typically last 15 – 25 years in West Palm Beach, but the original hinges and drawer glides wear out faster than the boxes – plan on replacing hardware every 8 – 12 years. Humidity is the silent factor; particleboard swells and loses its grip on fasteners long before the doors themselves fail.
Yes, in most cases a delaminated edge or a stripped hinge mortise can be repaired with new laminate and a backer insert. The exception is water-swollen particleboard – once the core has expanded, the door will never hang square again, and replacing the single front is cheaper than fighting it. Call (728) 203-3270 and we’ll tell you which camp you’re in.
Replacing hinges and glides on a standard Tremron kitchen takes one half-day visit. If we’re repairing door fronts or swapping countertops at the same time, the job typically runs two to five working days depending on material lead times.
We stock common Tremron-compatible hinges, drawer glides, soft-close dampers, and cabinet-grade plywood for box repairs in our West Palm Beach inventory. For door fronts and countertop material, we order by measurement and brand – Silestone, Cambria, and KraftMaid lead times run one to three weeks. We’ll give you the date before we place the order.
Call (728) 203-3270 to schedule your free estimate. A live person answers, 24/7 – not a voicemail box. We’ll talk through what’s failing, what it’ll cost to set right, and what we’ll protect while we’re in your home: drop cloths on the floors, shoe covers at the door, quiet tools during nap hours, and a photo of the clean-up before we leave.
Written by Graham Stein, Owner, Elmstead Remodeling West Palm Beach at Elmstead Remodeling West Palm Beach, serving West Palm Beach and nearby areas.
