Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why West Palm Beach Homeowners Choose Therma-Tru Construction
We provide independent Therma-Tru construction service across West Palm Beach, from full entry door replacements to weatherstripping, glass inserts, and hardware repairs. Our crews have installed and serviced Therma-Tru fiberglass, steel, and impact-rated door systems in hundreds of local homes, so we know exactly which components hold up to Florida sun and which ones fail quietly over time. We are not factory-authorized by Therma-Tru, and we say so plainly. What we offer is something different: hands-on knowledge of how these doors actually perform in West Palm Beach’s salt air, high humidity, and hurricane-driven rain. Call (728) 203-3270 to schedule a free estimate.
Why Trust Elmstead Remodeling West Palm Beach for Your Therma-Tru Construction?
When a Therma-Tru door starts binding, leaking, or fogging, the fix usually comes down to knowing which part failed and why. Our technicians work with these systems weekly, not occasionally. We know the Classic-Craft line’s fiberglass slab tolerances, the Pulse Series glass assembly seals, and the Tru-Defense impact door anchoring requirements. That familiarity means we diagnose faster and avoid replacing parts that are still doing their job.
Graham Stein, our owner, walked his first West Palm Beach job sites in neighborhoods like Flamingo Park before a single drop cloth went down, and he still reviews every Therma-Tru scope of work before the crew arrives. We write out the parts, the labor, and the start and end window before any work begins. Then we do exactly that. Our techs are background-checked and uniformed, so you know who is walking through your door. And when the job is done, the 365-Day Done Right Promise applies: if it is not done right, we make it right.
Styles & brands we work with
Common Therma-Tru Construction Problems We Fix in West Palm Beach
Sun-Induced Slab Bow on South-Facing Entries
Fiberglass is stable, but it is not immune to heat. A Classic-Craft or Smooth-Star door slab facing direct western or southern exposure in Therma Tru service in West Palm Beach can bow over years, especially when the door is dark-colored and the entry has no porch shade. We have measured slabs bowed nearly 1/4 inch out of plane. The door still looks fine from the curb, but it stops latching properly after a hot afternoon. The fix is usually a new slab ordered to the original specs, not a hinge adjustment.
Failed Compression Weatherstripping and Corner Seals
Summer downpours in West Palm Beach are not gentle. When the compression weatherstripping or the corner seals on a Therma-Tru entry door harden and crack from UV and humidity, water finds its way in. You will see moisture staining at the threshold or feel a draft near the latch side. We replace the original seals with genuine Therma-Tru components so the door’s air and water ratings stay intact.
Fogged Decorative Glass Inserts in Pulse Series and Classic-Craft
High humidity is a constant in West Palm Beach, and over years it works on the edge seals of decorative glass units in Therma-Tru Pulse Series and Classic-Craft doors with glass. The first sign is condensation inside the glass that will not wipe away. That means the seal has failed. In many cases we can replace the glass assembly without replacing the whole door slab, which saves real money.
Corroded Hinges and Threshold Screws in Salt-Air Areas
Homes near the Intracoastal, in neighborhoods like El Cid and Therma Tru in Jupiter areas, deal with salt air that eats at hardware. We see Therma-Tru doors where the hinge screws have corroded and loosened, letting the door sag enough to drag on the threshold. The fix is stainless steel hinge screws and, where needed, a stainless threshold. The OEM hardware on many older Therma-Tru doors was not spec’d for a coastal environment, and swapping in marine-grade fasteners solves the problem permanently.
Warped or Rotted Door Slabs in Low-Rise Older Homes
West Palm Beach’s 1920s and 1950s-60s housing stock often has entries with limited overhang protection. A Therma-Tru door that has been installed for 15 or 20 years in one of those openings can develop rot along the bottom rail when water splashes against it repeatedly. We see this most often in Flamingo Park and Northwood Hills homes near Boynton Beach Therma Tru service areas where the original porch overhangs were shallow to begin with. When the structure of the slab is compromised, we recommend replacement, not repair.
Therma-Tru Parts & Our Repair-vs-Replace Approach
We use genuine Therma-Tru replacement components whenever the door’s structure is sound. That includes compression seals, door sweeps, hinges, and glass assemblies. Factory parts fit exactly, which matters when you are preserving the performance ratings on an impact door or a door with decorative glass. Aftermarket parts can work in some cases, but we will not install a knockoff seal on a Tru-Defense impact system and call it good.
The honest line is this: when a door slab is warped, rotted along the bottom edge, or has a failed glass unit that would cost more than half the door’s value to replace, we tell you. Full replacement with a current Therma-Tru model often costs less over five years than repeatedly patching a failing legacy unit. We will write up both options with real numbers, and you decide. Call (728) 203-3270 for a free estimate on any Therma-Tru repair question.
Our Therma-Tru Service Process – Step by Step
- 1
Diagnosis and written scope. We inspect the slab, frame, hinges, seals, and glass assemblies with a straightedge and moisture meter where needed. You get a written price, itemized by part and labor, before any work starts.
- 2
Repair or replacement. For sound doors, we install genuine Therma-Tru seals, sweeps, hinges, or glass assemblies. For failed slabs or glass, we order the replacement to your door’s original specifications and install it with new compression seals and, where needed, a stainless steel threshold.
- 3
Testing. We check latch alignment, seal compression, and door swing. On hot afternoons, we test for sun-induced bind. On impact doors, we verify anchoring and sealing against the frame.
- 4
Clean-up and documentation. Drop cloths and shoe covers are standard. Before the crew leaves, we photograph the clean-up and walk you through the work. The 365-Day Done Right Promise applies to every Therma-Tru job we complete.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Products We Service & Install in West Palm Beach
We service and install the Therma-Tru Classic-Craft fiberglass entry doors, Smooth-Star fiberglass entry doors, the Pulse Series with decorative glass, and the Tru-Defense impact-rated door systems required by Miami-Dade High Velocity Hurricane Zone standards. That includes full exterior door replacement, impact door installation for hurricane protection, door refinishing, and hardware replacement. We keep common Therma-Tru replacement parts in local stock: compression seals, sweeps, stainless hinges, and threshold kits. For specialized glass assemblies and impact-rated slabs, we order directly to spec with a written lead time before the work starts.
We Also Service These Brands
Therma-Tru is one of several named-brand product lines we work with in West Palm Beach. We also install and service kitchen and bath materials from KraftMaid, Cambria, Silestone, and Kohler, along with other brands whose warranties homeowners can verify independently. Being multi-brand means we recommend what fits your door and your budget, not what we happen to stock.
FAQs – Therma-Tru Construction Service in West Palm Beach
Fiberglass doors are more dimensionally stable than wood or steel, but they are not immune to prolonged heat. We have measured Classic-Craft slabs in West Palm Beach bowed nearly 1/4 inch from years of direct western exposure. The bow is usually subtle enough that the door still looks fine from the outside, but the latch stops engaging in the afternoon. The fix is a new slab ordered to the original specs, not a hinge adjustment. Call (728) 203-3270 and we will check it with a straightedge.
In most Pulse Series and Classic-Craft doors with decorative glass, the glass assembly can be replaced independently of the slab. That matters because a fogged or failed glass unit is a seal problem, not a door structure problem. We replace the glass assembly with a genuine Therma-Tru unit that matches the original dimensions and frame profile. If the glass failure is accompanied by slab warping or rot, we will tell you and give you a written comparison of repair versus full replacement.
For many West Palm Beach homeowners, yes, and it comes down to two things: building code and insurance. Homes in Miami-Dade High Velocity Hurricane Zone areas require impact-rated or properly anchored openings, and insurers often discount premiums for documented impact door systems. The Tru-Defense line is rated for exactly those conditions. That said, the right answer depends on your home’s exposure, your existing door configuration, and your insurance policy specifics. Call (728) 203-3270 for an exact quote, and we will help you weigh the numbers.
Sometimes it is the hinges, but more often it is slab bow. When a south-facing or west-facing door absorbs heat all afternoon, the fiberglass expands and the slab can shift enough that the latch bolt no longer lines up with the strike plate. In the morning it locks fine; by 4 p.m. it will not. Hinge corrosion from salt air can also cause a sag that worsens in heat. We diagnose both with a straightedge and a screwdriver, and the fix is usually straightforward once the cause is identified.
Yes, in most cases. Therma-Tru fiberglass doors use factory-applied finishes with specific color codes, and we order replacements to those codes. For older doors where the finish has faded unevenly, we can refinish the paired door to close the color gap. Exact matching on a door that has been in West Palm Beach sun for 15 years is more art than science, but we will show you a sample before committing to the work.
How much does Therma-Tru construction cost in West Palm Beach?
| Service | Price Range |
|---|---|
| Exterior Door Replacement (Therma-Tru slab) | $1,400 – $4,200 |
| Impact Door System (Therma-Tru Tru-Defense) | $3,500 – $8,000 |
| Weatherstripping & Seal Replacement | $150 – $450 |
| Decorative Glass Unit Replacement | $400 – $1,200 |
These are the ranges we quote in West Palm Beach. Your exact price depends on the door model, the condition of the frame, and whether you are replacing a slab or a full system. You will receive a written price before any work starts. Call (728) 203-3270 for a free estimate.
Book Your Therma-Tru Service in West Palm Beach, FL
If your Therma-Tru door is binding, leaking, fogging, or just showing its age in the West Palm Beach climate, we will inspect it and give you a written price before any work starts. Call (728) 203-3270 to schedule your free estimate. A live person answers.
Written by Graham Stein, General Contractor and Owner at Elmstead Remodeling West Palm Beach, serving West Palm Beach since 2005.
