Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Windows & Doors: The West Palm Beach Owner’s Guide
If you have a Mr-Glass window or door that’s sticking, fogging, or leaking air, we can source the correct replacement part and install it in West Palm Beach, typically within one to two weeks of your call. Our installed window replacement work in this market runs $4,500 to $15,000 depending on how many openings are involved, and a single failed component like a balance, roller, or weather seal is usually far less. The way most owners discover the problem: a window that suddenly drops when opened, a patio door that scrapes the track, or a room that gets noticeably hotter in July because a seal gave out.
Before we get into specifics, one honest note: we are an independent West Palm Beach remodeling contractor, not a Mr-Glass dealer or affiliate. That said, we work on Mr-Glass windows and doors regularly because they’re common in homes built here in the last fifteen years, and we’ve learned where they fail and what fixes last in this climate.
Which Mr-Glass Models This Applies To
Mr-Glass has produced several series over the years, and the part you need depends on which one your home has. We see the most service calls on their single-hung and horizontal slider aluminum frames, which were installed widely in West Palm Beach neighborhoods like Flamingo Park and along the Carver Estates area during the 2000s and 2010s building wave. These units use a modular hardware system: the balances, pivot bars, and tilt latches are sized differently depending on whether your sash is 24, 28, or 32 inches wide, and matching that measurement is the single most common mistake we see with DIY part orders.
Here’s the compatibility gotcha worth knowing: Mr-Glass changed their balance shoe design around 2012. The older shoes have a round spring clip; the newer ones use a square clip. They are not interchangeable, even when the sash size matches. If you’re looking at a part number stamped on the frame, it’s usually on a silver label on the upper track. Read it before you buy anything. For most West Palm Beach homes, we recommend OEM parts when they’re still available, because the anodized finish matches the existing frames. Quality aftermarket equivalents work fine for moving parts and seals, and we’ll tell you plainly when that’s the better call.
Styles & brands we work with
Signs Your Mr-Glass Windows & Doors Is Failing
- A sash that won’t stay up (or drops hard when you close it). This almost always means a failed balance spring or a broken pivot bar inside the side channel. The part itself is inexpensive; the labor to swap it without scratching the track is where the real cost lives.
- Condensation between the glass panes. Your insulated glass unit has lost its argon fill and the seal is shot. In West Palm Beach humidity, this turns into permanent fog within one season. The fix is a new IGU, not a cleaning.
- A patio door that scrapes or skips on the track. Mr-Glass slider rollers are nylon and they degrade fast in salt air near the coast. You’ll hear a grinding sound long before the door refuses to move.
- Visible daylight or a draft around the frame edges. This is usually weatherstripping compression or, on older installs, failed caulking around the frame. Left alone, it gets worse each summer as the aluminum expands and contracts.
- The tilt latch or lock mechanism feels loose, or the window won’t lock at all. Lock bars bend when a sash is forced, and a window that won’t lock is both a security concern and an air leak. We replace the latch and straighten the bar rather than taping or shimming it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A single Mr-Glass window balance or roller replacement in West Palm Beach runs $180 to $340 installed, including the part and the trip to your home. Weatherstripping for a patio door is typically $140 to $260. A full insulated glass unit for a standard Mr-Glass sash runs $350 to $650 per pane, depending on whether it’s low-E (and most Mr-Glass units installed in this area are). If you’re replacing the entire window or door rather than the part, window replacement in West Palm Beach ranges from $4,500 to $15,000 for a whole home, and impact windows for the same project run $8,000 to $25,000 because of the laminated glass required by Florida building code in many zones.
Every quote we give includes the part number, the brand, the labor, and the written price before any work starts. You’ll see it itemized, not lumped. Our work comes with a one-year workmanship warranty, and the part itself carries whatever the manufacturer provides. No change orders after the crew arrives unless we find something structural and we’ll call you with a photo before we touch it.
DIY or Call Us?
You can safely do a few things yourself: clean the tracks on a Mr-Glass slider, check for loose screws on the lock plate, and note the silver label on the frame so you have the part number ready. That’s about where we’d stop. Window balances are spring-loaded under serious tension, and prying one out of the track without the right tool can send a metal clip flying and slice a hand open. We’ve also repaired enough DIY attempt damage to know that a $12 part can become a $300 track replacement in about thirty seconds. If it’s a roller, a balance, or anything inside the frame channel, call us at (728) 203-3270 and let one of our background-checked technicians handle it. We’ll put the written price in your hand before the first tool comes out.
FAQs
You can expect twelve to eighteen years of solid service from Mr-Glass windows in this climate, but the moving parts and seals typically need attention at the seven to ten year mark. Salt air near the coast shortens that, and homes within a mile of the Intracoastal often see roller and seal failures in under eight years.
Sometimes yes, for rollers and balances where the frame is still straight and the glass is intact, but a blown seal or a cracked pane means replacement, not repair. We’ll tell you honestly which one you’re looking at after we inspect the window or door, and the quote will reflect only the fix that will actually hold.
A single balance or roller replacement takes thirty to sixty minutes once the part is in hand. A full insulated glass unit takes closer to two hours because of the glazing and curing time. We work around your kids’ nap schedule and will use quiet tools when we can.
We stock the most common Mr-Glass balances, pivot bars, tilt latches, and slider rollers for the series we see most in West Palm Beach homes, and we order anything unusual the same day. We also keep parts on hand for KraftMaid, Cambria, and Silestone systems for our kitchen and bath clients.
If your Mr-Glass window or door is acting up and you want a straight answer on what it will cost to fix before you commit to anything, call us at (728) 203-3270. Graham Stein and the team will get you a written price and the exact part number, no guessing.
Written by Graham Stein, Owner, Elmstead Remodeling West Palm Beach at Elmstead Remodeling West Palm Beach, serving West Palm Beach and nearby areas.
