Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Roofing: The West Palm Beach Owner’s Guide
Mr-Glass roofing is a specific product line with a specific failure pattern, especially here in West Palm Beach. If you’re seeing a yellowed, cracked, or leaking Mr-Glass panel, we stock compatible replacement materials and install them for $400 to $1,800 on a typical roof repair, and $8,000 to $20,000 for a full replacement. What most owners tell us is they noticed water staining on the ceiling first, then looked up and found a cloudy or spider-cracked panel that wasn’t there last season.
We walk every job site ourselves before any work begins. Graham Stein, the owner, grew up in Los Angeles and learned the trade at LA Trade-Technical College, then spent decades on jobs up and down the West Coast. In Flamingo Park and the surrounding West Palm Beach neighborhoods, we’ve seen enough Mr-Glass roofs to know exactly what fails first and why, which means we can usually tell you the problem over the phone before we’ve even looked at it.
Which Mr-Glass Models This Applies To
Mr-Glass isn’t one product, it’s a family of related glass and glazing systems, and the roofing version goes by a few different names depending on when it was installed. Most often, Mr-Glass roofing in Florida is a reinforced acrylic or polycarbonate panel system used over patios, carports, and pool enclosures. The critical thing to check before you buy anything is the panel thickness and the edge profile. Mr-Glass panels generally run 3/8 inch to 1/2 inch thick, with either a tongue-and-groove edge or a flat lap edge. Match the edge first, then the width measurement, because the widths vary by series.
The serial label, if it’s still there, will be on the underside of the panel near a corner or along the edge banding. If the label is gone, which happens often after a few West Palm Beach summers, we take measurements on site and match against what’s actually installed. For Mr-Glass specifically, we recommend OEM panels when the roof is under ten years old and heavily UV-stable, and an equivalent aftermarket panel when the original series is discontinued and the color match makes more sense to approximate. In direct Florida sun, Mr-Glass roofs fade in a particular way, and we’d rather tell you that up front than deliver a patch that doesn’t match.
Styles & brands we work with
Signs Your Mr-Glass Roofing Is Failing
- Yellowing or clouding across the panel face. This is UV degradation in the acrylic or polycarbonate, and it’s common on older Mr-Glass panels exposed to full West Palm Beach sun. The panel is getting brittle even if it hasn’t cracked yet.
- Hairline cracks spreading from screw holes or edge seams. Thermal expansion and contraction in Florida’s wet-dry-wet cycle puts constant stress on the weakest points. Once the cracks start at the fasteners, water follows.
- Water staining on the ceiling or wall below the roof line. A leaking Mr-Glass panel doesn’t always show an obvious hole from above. Interior discoloration is often the first thing a homeowner actually notices.
- Sagging between supports. If the panels are bowing between beams or braces, the material has lost its structural rigidity. This can happen gradually and is easy to miss until it’s pronounced.
- Loud creaking or popping during temperature changes. That sound is the panels moving against their framing. It means the expansion joints or fasteners are binding, and that stress is working its way into the panel itself.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In West Palm Beach, expect $400 to $1,800 for a targeted Mr-Glass panel repair depending on how many panels are involved, and $8,000 to $20,000 for a full roof replacement. If it’s a patio or carport enclosure rather than a main roof, the repair range still applies, but a full replacement may land lower since the footprint is smaller. The main drivers are panel count, panel thickness, whether the framing is still sound, and how difficult the access is.
Every quote includes the same things: drop cloths down before we set up, shoe covers at the door, and a written price before any work starts. You’ll see labor and materials itemized by brand and quantity. The 365-Day Done Right Promise applies to every replacement we do. If it’s not done right after the job is complete, we make it right.
DIY or Call Us?
If you want to check something yourself before calling, look for obvious cracks, pulled fasteners, and sagging from the ground or a stable ladder. That’s useful information to have when you call us. What we don’t recommend is walking on Mr-Glass panels. Polycarbonate and acrylic get brittle with age, and after a decade of Florida sun, the panel may not hold your weight even where it looks solid. A fall through a skylight or roof panel is a serious injury risk, and we’d rather have you call us than test it.
Removing and reinstalling panels also means handling the sealants and fasteners in a way that doesn’t create a new leak, and that’s where the experience matters. If you’ve found a failing Mr-Glass panel, call us at (728) 203-3270. We’ll tell you what we’re likely looking at before we even arrive.
FAQs
Mr-Glass roofing panels generally last 10 to 20 years in West Palm Beach, with full-sun exposures on the south and west sides failing sooner. After about a decade, the panels start losing UV stabilizers and become visibly yellowed and brittle. Call (728) 203-3270 and we can tell you whether your roof is mid-life or near the end.
Small hairline cracks can sometimes be sealed as a short-term fix, but in almost all cases a panel with structural cracks needs replacement, not repair. Sealing a cracked panel without addressing the underlying brittleness usually buys you one storm season at most in West Palm Beach. For an exact quote, call (728) 203-3270, estimates are free.
Most single-panel replacements on a Mr-Glass roof take half a day to a full day, and a full replacement usually runs two to four days depending on the panel count. We give a firm start and end window in writing before the job begins.
We stock the most common Mr-Glass panel profiles and thicknesses on the truck for repair jobs, and we order specialty or discontinued series panels as needed. We also stock parts for KraftMaid, Cambria, and Silestone jobs, which helps when a remodeling project crosses into the roofing scope. Call (728) 203-3270 to confirm we have your panel profile ready.
Written by Graham Stein, Owner, Elmstead Remodeling West Palm Beach at Elmstead Remodeling West Palm Beach, serving West Palm Beach and nearby areas.
