Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Kitchen Remodeling: The West Palm Beach Owner’s Guide
If you have a Mr-Glass kitchen component that has failed or is starting to, Elmstead Remodeling West Palm Beach carries compatible parts and can usually have the swap done within a day or two of confirming the model. For most Mr-Glass kitchen remodeling replacements in West Palm Beach, installed pricing runs $1,200 to $4,800 depending on whether we’re replacing a single door panel, a hinge set, a drawer box, or a full glass-front cabinet run. The frustration usually starts small: a door that won’t sit flush, a soft-close mechanism that stopped catching, or glass that has started to rattle inside its frame when the kids run through the kitchen.
We’re an independent contractor in West Palm Beach. We’re not affiliated with Mr-Glass, but we’ve worked with enough of their door and drawer hardware to know exactly what fails first and which replacement parts actually hold up in Florida humidity.
Which Mr-Glass Models This Applies To
Mr-Glass kitchen lines vary by door profile and hinge bore spacing, and that’s where most mismatches happen. The two most common series we see in West Palm Beach homes are the framed glass-front cabinet doors with concealed clip hinges and the frameless slab doors with integrated soft-close channels. If you can find the hinge stamp or the label inside the drawer box, that tells us the bore spacing and cup depth. If the label is gone, we measure the hinge cup diameter (typically 35mm on Mr-Glass doors) and the door thickness (usually 3/4 inch). Those two numbers narrow things down fast.
For glass panels, the edge profile matters more than the glass thickness. Mr-Glass has used flat polished edges and beveled edges on different series, and a replacement panel with the wrong edge will not seat into the frame cleanly. We keep OEM Mr-Glass hinges and soft-close fittings on hand for the common series, and we’ll be honest when a quality aftermarket equivalent (Blum or Salice, usually) will outlast the original at a lower price. The decision comes down to warranty: OEM parts carry the Mr-Glass warranty, aftermarket parts carry the manufacturer’s own, and both are fine for most kitchens.
Styles & brands we work with
Signs Your Mr-Glass Kitchen Remodeling Is Failing
- Door sag at the top corner. This is almost always a worn hinge cup or a loose mounting plate, not a warped door. The hinge has simply lost its grip on the cabinet wall. We’ve seen this in Flamingo Park kitchens where the original hinge screws were only 5/8 inch into particleboard.
- Soft-close no longer catches. The small plastic damper inside the hinge has cracked. Florida heat accelerates plastic fatigue, and once the damper goes, the door slams. The hinge still works, but the soft-close is dead.
- Glass rattle when the door moves. The rubber glazing gasket around the glass panel has dried and shrunk. It’s a $4 part, but replacing it means removing the door and reseating the panel, which is where DIY scratches happen.
- Drawer box sides separating. Mr-Glass drawer boxes on older series were assembled with dowels and glue, and the humidity cycle in West Palm Beach eventually loosens the joint. Once you can see daylight through the corner seam, the drawer is close to failing under load.
- Hinge mounting plate pulling from the cabinet wall. This one matters because it’s structural. If the plate screws have stripped, the fix is not bigger screws; it’s a repair plate or a filler-and-redrill. We do this the slow, correct way so the door doesn’t fail again in six months.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Mr-Glass replacement work in West Palm Beach falls into predictable bands. A single hinge-and-damper replacement runs $95 to $180 installed, depending on whether we’re doing one door or several on the same visit. A full glass-front door replacement, panel included, runs $350 to $800. Rebuilding a drawer box with new glides and soft-close hardware sits between $200 and $450 per drawer. A full frame-and-glass cabinet run replacement across a typical 10-foot kitchen wall starts around $2,500 and can reach $4,800 if we’re matching custom glass or replacing multiple door sets.
Every quote is written before we touch a screw. That written price includes the part, the labor, the clean-up, and our 365-Day Done Right Promise: if the replacement doesn’t hold up the way it should within the first year, we make it right. Shoe covers and drop cloths are standard on every visit, not an add-on line item.
DIY or Call Us?
There are a few things an owner can safely check before calling. If a hinge feels loose, see if the screws on the mounting plate have backed out. If they’re still snug and the door sags anyway, the hinge is worn and needs replacement. That’s a $30 part, and it’s reasonable to swap yourself if you have the right driver bit and the patience to not strip the screw heads.
Glass panel work is different. Mr-Glass panels are tempered, and tempered glass is strong until it catches an edge against a tile floor or a countertop corner, then it shatters into a thousand cubes. If the glass is rattling, cracked, or loose in its frame, don’t pull the door apart to investigate. Call us at (728) 203-3270. We’ll bring the replacement gasket or panel, and we’ll do it without turning your kitchen into a glass cleanup site.
FAQs
In West Palm Beach’s humidity, the original Mr-Glass soft-close dampers typically last 7 to 10 years before the plastic loses its snap. Hinge bodies can go 15 to 20 years, but the damper is the consumable. We replace the damper as a first step before recommending a full hinge swap, which saves money. Call (728) 203-3270 if you’re unsure whether your hinge can be saved.
Sometimes. A loose mounting plate can usually be re-secured with a repair plate or a careful fill-and-redrill. A cracked soft-close damper is a replacement, not a repair. A sagging door is usually the hinge, not the door, and hinge replacement is the honest fix. We’ll tell you which one you have before any work starts.
Most single-door hinge or damper replacements take 30 to 45 minutes once we’re on site. A full drawer-box rebuild runs a couple of hours. We schedule by appointment, and you’ll have a written start and end window before the crew arrives. That window is part of the price we give you up front.
We keep the common Mr-Glass hinge sizes, soft-close dampers, mounting plates, and glazing gaskets stocked in our West Palm Beach vehicles. Glass panels and custom drawer boxes are usually ordered, which adds three to five business days. Call (728) 203-3270 and we’ll confirm what we have on the truck before scheduling.
Written by Graham Stein, Owner, Elmstead Remodeling West Palm Beach at Elmstead Remodeling West Palm Beach, serving West Palm Beach and nearby areas.
