Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Moen Windows & Doors: The West Palm Beach Owner’s Guide
If you have a Moen window or door that’s sagging, sticking, or letting air through, we stock the replacement hardware and weatherseal components to match it, and we install them in West Palm Beach homes every week. Installed replacement parts for Moen windows and doors typically run $150 to $900 depending on what failed and how many units need work, with full window replacement running $4,500 to $15,000. Most owners discover the problem on a humid morning in July when the window won’t close all the way, or during a September storm when water pools on the sill. You want it fixed before hurricane season tests every seal you own.
We’re Elmstead Remodeling West Palm Beach, a Cedarwell company, and we’re an independent service provider – not affiliated with Moen directly. We match OEM and quality aftermarket parts to Moen frames because we’ve seen what salt air and humidity do to hardware in this city. Our written price is in your hands before any work starts.
Which Moen Models This Applies To
Moen windows and doors in single-family homes across West Palm Beach fall into a few common series, and the right part depends on which one you have. Sliding glass doors built with Moen hardware use roller assemblies sized either 1-1/4 inch or 1-1/2 inch in diameter, and the wrong size feels loose immediately. For casement windows, the crank mechanism is the part we replace most: the gear housing strips under repeated pressure, and the handle spins without moving the sash. Look at the sticker on the inside edge of the frame or the glass for the series name; if the sticker has baked off in the sun (common after ten Florida summers), measure the roller and the track width before calling.
OEM Moen parts match exactly, and the manufacturer’s warranty follows them. Quality aftermarket equivalents often come from the same supply chains at 30 to 40 percent less, but fit tolerance matters more on windows than on most plumbing parts. We carry both options on the truck and we’ll tell you which one makes sense for your frame. We also keep parts in stock for KraftMaid, Cambria, and Silestone jobs, so if a Moen door is not the only thing we address on a visit, we can handle the full list in one trip.
Styles & brands we work with
Signs Your Moen Windows & Doors Is Failing
- The door drags or grinds when you slide it. The roller bearings have flattened on one side, a failure we see constantly in West Palm Beach because fine sand from the beach and construction dust works into the track and the bearings chew themselves down. The groove on the bottom rail is now riding on plastic, not steel.
- The hardware gets harder to turn each month. This is the hand crank on casements or fixed operators: the internal gears are galling. Greasing the mechanism only carries the metal shavings deeper. When it binds completely, the sash stays where it is.
- The lock handles line up but don’t catch. The strike plate or the lock body has slipped as the vinyl frame moved through hot/cold cycles. Florida frames expand measurably in August sun, and a lock that fit in January can be a quarter inch off by mid-year.
- Daylight shows through a closed window edge. The weatherseal has compressed to nothing, usually after direct east or west exposure. In West Palm Beach, that seal works harder than it ever would in a drier climate. What leaks is not just air – it’s your AC budget.
- Water stains appear on the interior sill after a normal rain. Most often this is a failed weep system or a gasket that has shrunk out of the corner joints. The window still looks fine. The wall below it won’t be fine in another season.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a single Moen door or window hardware repair in West Palm Beach, you should expect $150 to $500 for rollers, cranks, locks, and weatherseal, installed. A full window replacement in a West Palm Beach home lands between $4,500 and $15,000 depending on frame material, size, and whether we’re matching impact-rated glass for hurricane code. What drives the price on hardware work is access and what the frame reveals once we’re in: a rusted track that needs cleaning and realignment adds labor; a rotted bottom rail on a wood-frame Moen door means replacing the door itself, which starts around $900 and climbs from there.
Every estimate from Elmstead Remodeling West Palm Beach is a written line-item price before any tools come out of the truck. Labor, parts by brand and quantity, and a firm window for the work. Our 365-Day Done Right Promise covers the install: if it’s not done right, we make it right. And you’ll have a written price, not a conversation, before we begin.
DIY or Call Us?
What a homeowner can safely do is clean the lower track on a sliding door, clear the weep holes with a soft bottle brush, and check that the screws holding the lock plate are still seated. Do that on a dry Saturday morning and it costs you nothing. What goes wrong in DIY is the roller replacement on a heavy glass panel: the door weighs 80 to 140 pounds, the spring-loaded rollers release suddenly when the screws back out, and the panel twists toward you. We set the panel on a padded work surface and line the floor with a drop cloth before the first screw comes out. If you’d rather not lift the door at all, call (728) 203-3270 and let us do the lifting.
FAQs
Hardware typically survives 10 to 15 years in our humidity before rollers flatten and cam locks wear, while the frames themselves can last 20 to 30 years if the weatherseal is replaced on schedule. The salt air near the Intracoastal shortens hardware life by a few years compared to inland neighborhoods. Call (728) 203-3270 for an assessment of your specific units.
Some parts can be cleaned and re-lubed, but flattened rollers and stripped cranks are replaced, not repaired – the materials are not made to be rebuilt. We’ll tell you plainly which is which when we look at it. Call (728) 203-3270 and we’ll come take a look.
A roller replacement or lock replacement on one Moen door usually takes 45 to 90 minutes on site. A full weatherseal replacement on a window averages 30 minutes per window. We’ll give you a time window in writing before the job starts.
Yes, most of the time. We keep common Moen rollers, cranks, locks, and weatherseal sizes on our service vehicles, along with aftermarket equivalents for older frames. If your series calls for a part we don’t have, we order it and schedule the install once it arrives, usually within three to five business days.
Written by Graham Stein, Owner, Elmstead Remodeling West Palm Beach at Elmstead Remodeling West Palm Beach, serving West Palm Beach and nearby areas.
