Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why West Palm Beach Homeowners Choose KraftMaid Construction
Elmstead Remodeling West Palm Beach provides independent KraftMaid cabinet installation, refacing, and Kraftmaid service in West Palm Beach throughout the area, from Flamingo Park bungalows to Intracoastal condos. We’re not a KraftMaid authorized dealer, and we don’t pretend to be. What we are is a local crew that has installed, refaced, and repaired KraftMaid Vantage, DuraKraft, Kemper Choice, and Venicia cabinetry in hundreds of West Palm Beach kitchens, and we know exactly how this climate treats each line. High humidity near the water, salt air, and the steam from daily cooking all work on cabinet door fronts and drawer boxes in ways the manufacturer’s brochure never mentions. We do. Call (728) 203-3270 to talk about your KraftMaid cabinets, and we’ll tell you straight what’s fixable and what’s not.
Key Takeaways:
- Independent KraftMaid service provider in West Palm Beach, not manufacturer-authorized
- Written price before any work starts, every time
- We service and install all major KraftMaid lines: Vantage, DuraKraft, Kemper Choice, Venicia
- 365-Day Done Right Promise on every completed project
- Live person answers the phone 24/7 at (728) 203-3270
Why Trust Elmstead Remodeling West Palm Beach for Your KraftMaid Construction?
Graham Stein, who leads our West Palm Beach crew, learned the trade at Los Angeles Trade-Technical College and spent decades on job sites up and down the West Coast before settling his crew here. He still walks every KraftMaid kitchen before a single drop cloth goes down. That matters because KraftMaid cabinetry is not one product. It’s four distinct lines built to different tolerances, and the way a Vantage door front responds to Florida humidity has nothing to do with how a DuraKraft drawer box wears. Our technicians know the difference because they’ve seen it on the job, not from a training video. We keep a written scope of work in your hands before the first tool is unpacked: itemized labor, materials by brand and quantity, and a firm start and end window. Put it in writing, then do exactly that. If a hinge clip is fatigued on a DuraKraft soft-close, we replace the clip, not the door. If the door itself is compromised, we say so.
We’re an independent KraftMaid service provider. That means we can be honest about what’s worth repairing and what isn’t, without a manufacturer’s replacement quota hanging over our heads. We source KraftMaid-compatible hinges, glides, and touch-up kits from trusted aftermarket suppliers when original parts are discontinued or backordered. We also install and service new KraftMaid cabinetry, reface existing boxes, and handle partial kitchen remodels where the KraftMaid boxes stay and everything around them changes.
Styles & brands we work with
Common KraftMaid Construction Problems We Fix in West Palm Beach
West Palm Beach’s climate creates specific failure patterns in KraftMaid cabinetry that differ from what homeowners see in drier markets. Here are the problems we see most often, by line:
- Thermofoil peeling on Vantage door fronts. The Vantage line uses a thermofoil wrap over MDF cores. In high-humidity kitchens near the Intracoastal, steam from cooking penetrates the seam where the film meets the door edge, and the bond fails. We see it most often on upper cabinet doors above ranges and on dishwasher-adjacent panels. The fix is not glue. It’s removal, core prep, and re-application of a heat-bonded film rated for this humidity level, or a reface with new doors.
- DuraKraft soft-close hinge clip fatigue. DuraKraft uses a spring-loaded soft-close mechanism built into the hinge cup. After five to seven years of daily use, the plastic clip that holds the spring assembly fatigues, and the door slams instead of catching. The door itself is usually fine. We replace the hinge, remount the door, and adjust the overlay. It’s a fifteen-minute fix when you have the right part on the truck.
- Kemper Choice shelf pin holes wallowing out. Kemper Choice wall cabinets use adjustable shelves on metal or plastic shelf pins seated in pre-drilled holes in the cabinet sides. In West Palm Beach, repeated humidity cycling softens the particleboard just enough that the pins start to work loose. Homeowners reset the shelves, the pins wallow the holes wider, and eventually the shelf drops. We re-bore the holes, install threaded inserts, and the shelf holds.
- Drawer box side stains and swelling from dishwasher steam. Butler’s pantry installations with a dishwasher close to a base cabinet run often show steam damage on the drawer box sides. The boxes swell, the glides bind, and the drawer sticks. We replace the drawer box, not the whole cabinet, and we add a steam deflector where the layout allows.
- Venicia line gaps after settle or water intrusion. Venicia is KraftMaid’s frameless European-style line, and it’s less forgiving than face-frame construction when a wall settles or a small leak goes unnoticed. Gaps open between cabinets, doors lose alignment, and the clean look goes. We realign, shim, and re-square the run where possible. Where water has damaged the box, we say so and recommend targeted replacement before the problem spreads.
KraftMaid Parts & Our Repair-vs-Replace Approach
We keep a service truck stocked with the KraftMaid-compatible parts West Palm Beach kitchens actually need: 110-degree and 165-degree soft-close hinges for DuraKraft and Kemper Choice, full-extension drawer glides, shelf pins and threaded inserts for Kemper Choice wall cabinets, and touch-up kits matched to the most common KraftMaid finishes in this market. For discontinued original parts, we use aftermarket suppliers whose tolerances we’ve verified on job sites, not from a spec sheet.
The repair-versus-replace conversation is straightforward. A hinge, a glide, a shelf pin, a touch-up: we repair. Delaminating thermofoil on multiple Vantage doors: we recommend replacement with a DuraKraft upgrade rather than a patch that will fail again in eighteen months of West Palm Beach humidity. A cracked frame or water-damaged box: replace. We’ll tell you the repair cost, the replacement cost, and what we’d do in our own kitchen. Then you decide. Call (728) 203-3270 with a photo of the problem, and we’ll give you an honest first take over the phone.
Our KraftMaid Service Process – Step by Step
Every Kraftmaid in Jupiter and West Palm Beach follows the same sequence, and you’ll know the written price before step one begins.
- 1
Diagnosis. A technician inspects the cabinet run, identifies the specific KraftMaid line and failure point, and photographs everything. For Vantage thermofoil, we check humidity exposure and door-edge seams. For DuraKraft, we check every hinge clip in the run, not just the one that failed. We document what we find in writing.
- 2
Written scope and price. You get a line-item scope: labor, parts by brand and quantity, and a firm start and end window. No estimate that grows after the crew arrives.
- 3
Repair or install. Shoe covers on, drop cloths down, and quiet tools during children’s sleep hours where possible. We ask before we move anything. Every repair gets tested for alignment, travel, and catch before we call it done.
- 4
Warranty and clean-up. Every completed KraftMaid project is covered by our 365-Day Done Right Promise. We photograph the clean-up before the crew leaves, so you can see what we left. If it’s not done right in the first year, we make it right.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in West Palm Beach
We work on all four major KraftMaid lines in West Palm Beach. Vantage is the thermofoil-wrapped, value-focused line we see most often in 1990s and 2000s kitchens in neighborhoods like Flamingo Park. DuraKraft is the solid-wood door line with the soft-close hardware that holds up well except for the hinge clips. Kemper Choice is the semi-custom line with painted and stained finishes and adjustable shelving. Venicia is the frameless line we see in newer high-rise and Intracoastal condominium kitchens. We stock the common wear parts for all four lines on our service truck, and we install new KraftMaid cabinetry for kitchen remodels, partial remodels, and island additions anywhere in West Palm Beach.
We Also Service These Brands
KraftMaid is a significant part of our work in West Palm Beach, but it’s not the only line we touch as a General Contractor. We install and refinish countertops from Cambria and Silestone, and we specify fixtures from Kohler and Toto on the kitchen and bath projects we run. That multi-brand familiarity matters when your KraftMaid cabinets share a wall with a Cambria countertop and a Kohler sink, and all of it needs to come together in one clean install.
FAQs – KraftMaid Construction Service in West Palm Beach
Yes, in most cases we can reface Vantage doors rather than replace the entire cabinet run. We remove the doors and drawer fronts, prep the MDF cores, and apply a heat-bonded film rated for this humidity level. On a 2016 Vantage kitchen near Belvedere Road, we found clouded thermofoil peeled back from the upper cabinet edges after years of steam from a pasta pot, a common issue we also address with our Boynton Beach Kraftmaid service. We removed the doors and drawer fronts, prepped the cores, applied a matte white film rated for 85% humidity, and remounted everything with new 110-degree soft-close hinges. That kitchen held through the next two hurricane seasons without a single bubble. Call (728) 203-3270 for an exact quote, and bring us a photo of the peeling if you have one.
The soft-close mechanism on DuraKraft and Kemper Choice lines uses a spring-loaded clip inside the hinge cup that fatigues with daily use. It’s rarely the door or the hinge body. We replace the hinge, remount the door, and adjust the overlay. If one hinge has gone, the others in the run are usually close behind, so we’ll check them all and give you a written price for the full run before we touch a screwdriver.
Not always. If the drawer box sides are sound and the bottom panel is sagging from weight or a previous repair, we can replace the bottom panel and re-set it into the dado. If the sides are swollen from dishwasher steam or the dovetails are splitting, the box is done and a new box is the honest fix. We’ll tell you which one you have and what each option costs. Call (728) 203-3270 and we’ll walk you through what to look for.
Yes. We stock touch-up kits matched to the most common KraftMaid finishes in West Palm Beach, including the whites and grays we see most often in Vantage and Kemper Choice kitchens. We match the finish by door sample, not by guess. Touch-up is a small job, and we’re happy to do it on its own or as part of a larger repair visit.
Often, yes. We can re-bore shelf pin holes, add or remove face-frame stiles, and reface adjacent doors to match. If the new appliance is deeper than the old one, we may need to modify the cabinet box itself or build out the doors. It depends on the layout and the condition of the existing boxes. We’ll measure, photograph, and give you a written price before any work starts. Call (728) 203-3270 to schedule a look.
KraftMaid-related work in West Palm Beach typically runs between $800 and $13,000 depending on the scope. A touch-up or hinge replacement is on the low end. A full cabinet refacing or new island installation is on the higher end. Here are our typical ranges for the work we do most:
| Service | Price Range |
|---|---|
| Cabinet Refacing (KraftMaid Vantage) | $4,000 – $13,000 |
| Kitchen Island Installation (KraftMaid DuraKraft) | $3,000 – $10,000 |
| Countertop Installation (Quartz/Granite over KraftMaid) | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
These are honest West Palm Beach market ranges. Your exact price depends on your cabinet condition, the hardware you choose, and the size of the run. Estimates are free. Call (728) 203-3270 and we’ll give you a written number, not a guess.
No. We are an independent KraftMaid service provider, not a manufacturer-authorized dealer or warranty station. That independence is why we can be straight with you about repair versus replace, and why we use aftermarket parts when they’re the better value and original parts when the job calls for them. We never imply KraftMaid authorization, and you’ll never hear us claim it.
Book Your KraftMaid Service in West Palm Beach, FL
If your KraftMaid cabinets need attention in West Palm Beach, call us at (728) 203-3270. We’ll talk through what you’re seeing, give you a straight first take, and schedule a written estimate. A live person answers, day or night.
Written by Graham Stein, Owner at Elmstead Remodeling West Palm Beach, serving West Palm Beach since 2005.
