Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Windows & Doors: The West Palm Beach Owner’s Guide
KraftMaid window and door replacement in West Palm Beach typically runs $4,500 – $15,000 installed, depending on the series and how many openings you’re addressing. We stock KraftMaid-compatible hardware and replacement parts on our trucks, and most single-unit swaps finish same day once we confirm the model. The usual way homeowners find us: a window won’t stay open, a sliding door drags across its track, or the latch no longer catches after years of salt air and afternoon thunderstorms.
South Florida humidity does specific things to window and door hardware. Rollers corrode. Weatherstripping turns brittle and lets conditioned air leak out. Aluminum frames accumulate white oxidation at the corners. If your KraftMaid product is five years or older and exposed to ocean-adjacent air anywhere near West Palm Beach, the failure you’re seeing is almost certainly a replaceable part, not a reason to replace the whole unit.
Which KraftMaid Models This Applies To
KraftMaid’s window and door lines share hardware families across several series, but there’s one compatibility gotcha owners run into constantly: the 2000-series sliding doors use a different roller profile than the 3000-series, and they are not interchangeable. The roller diameter, the housing width, and the mounting tab spacing all differ by a few millimeters. We’ve watched homeowners order “universal” rollers online, only to find the door sits 1/8 inch higher and scrapes the frame.
Before you buy anything, pull the part and look for the laser-etched code on the edge or the back face. KraftMaid stamps a date code and series identifier on most window sashes and door panels made after 2013. If the stamp is gone or unreadable, measure the part twice with calipers, not a tape measure. A 1.5 mm difference in roller width is the difference between a door that glides and a door that fights you every morning.
OEM vs aftermarket: We install genuine KraftMaid parts where they’re available because the tolerances match the frame rails exactly. For discontinued series, we use aftermarket equivalents from the same manufacturers KraftMaid sourced from originally, then verify fit before the part goes into the opening. You’ll know which one you’re getting before we start, and the price on the written quote is the price you pay.
Styles & brands we work with
Signs Your KraftMaid Windows & Doors Is Failing
- The window won’t stay up without a prop. The block-and-tackle balance or constant-force coil spring inside the jamb has lost tension. In West Palm Beach, the coils rust from humidity, not from use.
- The sliding door sounds like it’s dragging gravel. The nylon roller wheels are worn flat or the stainless bearings have seized. Once the wheel stops spinning, the door grinds the track into a channel of aluminum shavings.
- You can see daylight or feel air around the edges. The compression weatherstripping has taken a permanent set. KraftMaid uses EPDM and Q-Lon gaskets that should spring back; when they don’t, your AC bill climbs faster than a July thunderstorm.
- The latch or multi-point lock needs two hands and a hip-check to engage. The strike plate has drifted out of alignment as the door panel settled, or the lock gearbox internals have stripped. Forcing it only ruins the keeper.
- Condensation or fog between the glass panes. The insulating glass unit seal has failed. South Florida’s humidity pushes moisture past a compromised seal every afternoon, and once fog shows, the unit’s argon fill is gone and the thermal performance is shot.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a single window sash balance, roller set, weatherstripping run, or lock replacement on a KraftMaid unit in West Palm Beach, you’re usually looking at $150 – $600 in parts plus 1 – 2 hours of labor. Full window replacement across a typical Florida ranch runs $4,500 – $15,000 installed, and impact-rated replacements push toward the higher end. Here’s how the parts break down:
- Balance or coil spring replacement: $40 – $120 per window, plus labor
- Sliding door roller assembly (pair): $60 – $180 depending on series
- Weatherstripping (full door or window perimeter): $80 – $250
- Multi-point lock and gearbox: $110 – $320
- Insulated glass unit replacement: $280 – $900 depending on size and low-E coating
- Full window replacement (installed): $4,500 – $15,000
- Impact window installation: $8,000 – $25,000
Every quote comes in writing before any work starts, itemized by part number and labor rate. No allowance adders, no “we found something else once we opened it up” surprises. The price we hand you is the price on the final invoice, and the work carries the 365-Day Done Right Promise. If a part fails or an installation isn’t right within a year, we come back and fix it.
DIY or Call Us?
Some KraftMaid fixes are genuinely safe to attempt: cleaning a track, tightening a loose handle screw, or replacing a snap-in weatherstrip. If you’re comfortable with a screwdriver and the part doesn’t require unweighting the sash, go slow and photograph everything before you disassemble it.
What we’d ask you not to do yourself: anything involving a wound torsion balance, a spring-loaded sash system, or lifting a sliding door off its track. Those springs hold real stored energy. A balance that releases unexpectedly can break fingers and shatter glass into a room where your kids play. One of our techs in West Palm Beach will have done this exact repair dozens of times, on this exact series. You call, we show up with the right part, it’s done before dinner. (728) 203-3270.
FAQs
Hardware like rollers, balances, and weatherstripping typically lasts 5 – 10 years in West Palm Beach’s salt-and-humidity climate, while frames and glass can go 20+ years if maintained. The replacement parts are cheap; what costs money is ignoring the failure until it damages the frame. Call (728) 203-3270 and we’ll tell you exactly what you’re looking at.
Most failures in KraftMaid windows and doors are part-level repairs, not whole-unit replacements. A worn roller, a tired balance, or a dried weatherstrip swaps out in under an hour, and the rest of the unit keeps working like new. We’ll always quote the repair before we quote a replacement window or door.
A single balance, roller set, or lock replacement takes 1 – 2 hours on site once we’ve confirmed the model. Full door panel or window sash replacements can stretch to half a day depending on trim work and caulking. We’ll give you a firm window before we arrive.
We keep common KraftMaid 2000- and 3000-series rollers, balances, locks, and weatherstripping on our trucks for same-visit fixes. Discontinued series or odd-sized glass units may take 3 – 5 business days for the part to arrive, and we’ll tell you that timeline before you pay for anything. Call (728) 203-3270 for an exact quote, free.
Written by Graham Stein, Owner, Elmstead Remodeling West Palm Beach at Elmstead Remodeling West Palm Beach, serving West Palm Beach and nearby areas.
