Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Fence Installation: The West Palm Beach Owner’s Guide
Jerith fence installation in West Palm Beach typically runs $3,500 – $9,000 for a full aluminum or steel fence line, depending on linear footage, gate count, and ground conditions. We stock Jerith-compatible posts, panels, and gate hardware locally, so most installations are scheduled within a week of the written quote. What usually brings a homeowner to this page is a gate sagging on its hinges, a post leaning after a storm, or a panel that popped loose when a child or dog hit it. You know the piece that failed. We’ll match it, price it, and install it without making you guess what anything costs.
Heads-up on the obvious: Elmstead Remodeling West Palm Beach is an independent contractor. We are not affiliated with Jerith or its parent company. We install and service Jerith fencing because the aluminum holds up in South Florida salt air, and because parts are still readily available when a gate eventually needs work.
Which Jerith Models This Applies To
Jerith has made aluminum and steel residential fencing under a few series names over the years: the Estate, Coventry, and Classic lines are the ones we see most often in West Palm Beach yards, along with the Regency and Ultra series on newer installations. The good news is that Jerith post dimensions have stayed fairly consistent across most residential lines: 2″ x 2″ posts, rails that slide into pre-punched holes, and pickets that lock into punched tabs. The gotcha is the gate hardware. Older Jerith gates used a different hinge pin system than the current adjustable hinges, so if you’re replacing just a hinge or latch, you need to know whether the gate frame is from before or after roughly 2015. We check the gate frame label or measure the hinge mortise before ordering.
On OEM versus aftermarket: for the panels themselves, OEM Jerith panels are worth the extra cost because the powder coat is matched to the batch. Aftermarket panels are fine for interior sections where nobody sees both sides in the same light, but in direct Florida sun, the color difference between an OEM panel and a generic one is visible within a year. For gate hardware, we actually prefer quality aftermarket hinges and latches on older Jerith gates because the updated aftermarket designs are built for salt air better than the original 2000s-era hardware. We carry both on the truck.
Styles & brands we work with
Signs Your Jerith Fence Installation Is Failing
- Gate dragging or sagging on one side. This is almost always hinge wear or a post that has started to lean. In West Palm Beach’s sandy soil, posts without a proper concrete footer settle unevenly, especially along the Intracoastal side of town.
- Pickets popping loose from the lower rail. On older Jerith panels, the punched tabs that hold pickets in place corrode first at the bottom rail, where irrigation overspray hits. You’ll see one or two pickets tilted, then more, usually near a sprinkler head.
- Post leaning but concrete footing intact. This is a sign the post was never set deep enough, or that the original installer used a narrow footer. Jerith’s engineering assumes a minimum footing depth; a shallow pour means the post works loose gradually.
- White chalky residue on the powder coat. This is oxidation, and it’s cosmetic at first. Left alone in West Palm Beach’s humidity, it spreads and eventually exposes bare aluminum, which then pits. A wipedown with a mild cleaner slows it; replacing the affected panel stops it for good.
- Rattle or clatter from the gate latch. The latch strike on many Jerith gates is a spring-loaded piece that loses tension over a few thousand open-and-close cycles. You’ll hear it before you see it: the gate doesn’t seat firmly, and the wind bangs it around.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a section replacement or a gate rebuild rather than a full fence line, you’re usually looking at a smaller number within that range. Here’s how the work breaks down in West Palm Beach:
- Single post replacement with proper concrete footer: $350 – $650 installed, including demo of the old footing.
- Gate rebuild (hinges, latch, frame straightening, re-hang): $500 – $1,400 depending on gate width and whether the frame itself is salvageable.
- Full panel replacement, 6 – 8 foot section: $800 – $1,800 with posts if needed, including color-matched OEM panel.
- Complete Jerith fence installation, 100 – 150 linear feet with one gate: $3,500 – $9,000, including permit, concrete, panels, posts, and gate hardware.
Every quote is written before any work starts. It lists the panel brand, the post size, the number of concrete bags, the hardware part numbers, and the labor, separated out so you can see exactly what you’re paying for. No estimate that grows after the crew arrives. If we find something behind the fence line that changes the job, we call, explain it, and write the change on paper before touching it.
The work itself is covered by our 365-Day Done Right Promise: if the gate still sags or the post shifts within a year, we come back and make it right. No charge, no argument.
DIY or Call Us?
Fence panel and post work is not the most dangerous thing on a property, but it’s heavier and more involved than most homeowners expect. The safe DIY tasks: cleaning oxidation off panels, tightening visible screws on a latch, and checking for loose pickets. What we’d tell you to avoid: pulling and resetting a post yourself. Getting a post plumb, centered, and set at the right depth in West Palm Beach’s sandy, high-water-table soil is a two-person job with a level, a string line, and often a concrete pump. Get the post a quarter-inch off and every panel connected to it looks wrong.
If you want the gate opening and closing like it did when the fence was new, call (728) 203-3270. We’ll come out, measure, and hand you a written price. You can decide after you see the number.
FAQs
The aluminum panels themselves will typically last 20 to 30 years in South Florida if the powder coat stays intact. The weak points are gate hardware (10 – 15 years), fence posts if the footings were undersized, and the bottom rail on any panel that sits within the arc of an irrigation sprinkler. Salt air near the Intracoastal shortens hardware life by a few years compared to inland neighborhoods like Flamingo Park. If you’d like us to walk the fence line and tell you what’s got years left versus what needs attention, call (728) 203-3270 and we’ll schedule an estimate at no charge.
A leaning post can sometimes be straightened if the concrete footing is solid and the post itself isn’t bent. If the footing cracked or the post corroded at ground level, replacement is the honest answer. The concrete footings from the original Jerith installation may be undersized for current wind-code requirements in Palm Beach County, which means a replacement post often beats a repair on cost per year of service. Call (728) 203-3270 and we’ll tell you which situation you have, in plain English, before any work is scheduled.
Most gate rebuilds are done in a single day, including the concrete set time for any post work. A full fence installation runs two to four days depending on linear feet and how many gates are involved. We tell you the window in writing before the job starts, and we work during the hours that make sense for your family’s schedule, which is why many of our West Palm Beach clients in Flamingo Park and nearby neighborhoods have us start after school drop-off when the house is quiet.
We stock the common items on the truck: gate hinges, latches, tension springs, post caps, and touch-up paint matched to Jerith’s standard colors. For a full panel or a rail replacement in a specific color, we order OEM from our supplier, which usually takes three to five business days in West Palm Beach. The written quote tells you up front whether a part is on the truck or on order, so there’s no surprise delay after the work is scheduled.
Written by Graham Stein, Owner, Elmstead Remodeling West Palm Beach at Elmstead Remodeling West Palm Beach, serving West Palm Beach and nearby areas.
