Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Fence Installation: The West Palm Beach Owner’s Guide
CWS fence installation in West Palm Beach typically runs $3,500 to $9,000 installed, depending on linear footage, gate hardware, and whether we’re replacing panels, posts, or the full run. We stock CWS-compatible fence components locally, so in most cases we can complete the replacement within one to two days of your written estimate. Most owners call us after a summer storm works a post loose in sandy soil, or when a gate starts dragging because the hinge-side post has shifted out of plumb.
Before any work starts, Graham Stein walks the fence line himself and puts the scope in writing: panel count, post depth, concrete mix, hardware by name, and a firm price. No estimate that grows after the crew arrives.
Which CWS Models This Applies To
CWS fence systems run on a few distinct post and panel profiles, and the compatibility gotcha is this: the post wall thickness and the rail-to-post bracket spacing changed between older CWS residential lines and their current commercial-spec series. A panel that clips onto a 2-inch square post will not seat correctly on the newer 2.5-inch heavy-wall posts without adapter brackets. We match the bracket type by pulling one panel off and measuring the post pocket before ordering anything.
We are an independent service provider, not affiliated with CWS. For OEM panels, we source direct from CWS distribution where the fence is still in production; for discontinued lines, we use quality aftermarket equivalents in matching gauge and finish. The decision point is usually this: if your fence is under ten years old, OEM is worth it. If it’s older and the powder coat is already failing in the salt air, a good aftermarket panel with a marine-grade finish often outlasts the original.
We also stock and install parts for KraftMaid, Cambria, and Silestone product lines on the remodeling side, so the same standard for named-brand materials carries across every job we do.
Styles & brands we work with
Signs Your CWS Fence Installation Is Failing
- Posts leaning at the corner or gate hinge. This is almost always a concrete footing that was underset for South Florida sand. In West Palm Beach, a 24-inch footing is the minimum that holds; 30 inches is what we pour on gate posts.
- Gate dragging or binding at the latch. The hinge-side post has moved even a quarter-inch out of plumb. That quarter-inch at the post becomes two inches of drop at the latch end of a six-foot gate.
- Panels rattling against the posts in wind. The rail-to-post bracket screws have wallowed out their holes, usually from repeated storm loading. Tightening them back in rarely holds for more than a season.
- Rust streaking below the bracket points. Dissimilar metal contact between the steel bracket and aluminum panel, accelerated by salt air. Once the streak appears, the bracket is already compromised internally.
- Bottom rail sagging or popping out of the post channel. This is a failure of the rail insert, not the panel. We replace the insert and re-seat the rail, which is a half-day fix when caught early.
Replacement Cost & What’s Included
An installed CWS fence replacement in West Palm Beach runs $3,500 to $9,000. On the lower end, you’re looking at a shorter run of panel replacement with existing posts still sound. On the upper end, we’re pulling and resetting posts, pouring new footings, replacing gate hardware, and re-hanging the gate so it clears and latches.
What moves the number: linear footage, post condition, gate count, and whether the old footings need to be jackhammered out or can be re-used. Every price we quote is a written, line-item figure: panels by count, posts by depth, concrete by bag, hardware by brand. We don’t write “fence replacement” as a single lump sum, because you should be able to see exactly where the money goes.
The work carries our 365-Day Done Right Promise. If the fence isn’t right after a year of West Palm Beach weather, we make it right.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
What you can safely check: sight down the fence line from each end to spot which posts are out of plumb, and slide a level against the gate post. You can tighten bracket screws to stop a rattle for a week or two. What you shouldn’t do yourself: pull a set post out of a concrete footing. That’s a two-person job with a jackhammer or a post puller, and getting the new footing depth wrong in sandy soil means doing the whole thing again in eighteen months.
Gates under tension are the one we get most cautious about. A sprung gate with a failing hinge bracket can drop suddenly, and a falling aluminum gate panel will hurt someone. If the gate is binding or the hinge bracket shows rust bleed, call us at (728) 203-3270. We’ll come look, put the fix in writing, and do exactly that.
FAQs
In West Palm Beach’s salt air and summer storm cycle, a CWS aluminum fence with proper footings typically lasts 15 to 20 years before posts start showing movement. The panels can last longer; it’s usually the footings and brackets that fail first. Call (728) 203-3270 for an evaluation of your specific run.
Yes, if the post is still straight and the footing is the only problem, we can reset the post in a deeper pour and re-bracket the panels. If the post has also twisted or the panel channel is compromised, replacement is the more honest fix. We’ll write the recommendation out with pricing either way.
Most CWS fence replacements in West Palm Beach take one to two days: day one for pulling and setting posts, day two for hanging panels and adjusting gates to clear and latch cleanly. We give you a firm start and end window in the written estimate.
We keep common CWS-compatible brackets, inserts, and gate hardware on the truck, and we can have panels and posts matched to your series within a few days. For discontinued lines, we source aftermarket equivalents in matching gauge and finish so you’re not left waiting on a backordered part. Call (728) 203-3270 and we’ll confirm the part match before you commit.
Get a Written Price for Your CWS Fence in West Palm Beach
If you’ve got a CWS fence post leaning, a gate dragging, or a panel rattling in the wind, call (728) 203-3270. We’ll walk the line, measure the posts, write the scope, and hand you a price before any work starts. Drop cloths go down, the driveway gets blown clean, and we send a photo before we leave. Put it in writing, then do exactly that.
Written by Graham Stein, Owner, Elmstead Remodeling West Palm Beach at Elmstead Remodeling West Palm Beach, serving West Palm Beach and nearby areas.
