Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cover Kitchen Remodeling: The West Palm Beach Owner’s Guide
Most homeowners searching this page have a Cover kitchen that is no longer working the way it did when it was installed. The usual story is a cabinet box that has pulled loose from the wall after years of South Florida humidity, or a countertop seam that has started to separate near the sink. In West Palm Beach, a Cover kitchen remodel typically runs $14,000 – $45,000 installed, and we carry the cabinet, hinge, and drawer hardware most Cover kitchens need on the truck. If your cabinet door swings open on its own, a drawer front has cracked at the mounting point, or the finish is flaking at a cut edge, the problem is usually one failed component, not the whole kitchen. Fixing the failed part early keeps the rest of the kitchen intact.
Which Cover Models This Applies To
Cover cabinetry is sold through kitchen and bath dealers in Florida, and the line breaks down into a few recognizable series. The two we see most in West Palm Beach homes are the Cover Shaker and Cover Slab lines, with a smaller number of Cover inset-style doors in older builds near Flamingo Park and the El Cid neighborhood. The main compatibility issue with Cover parts is door drilling: Cover boxes use a 35 mm cup hole for concealed hinges, which matches Blum and Grass hardware, but the side-mount drawer slides on older Cover units are a narrower profile than what the big box stores carry. If you are not sure which series you have, pull a drawer and look at the side rail. If the rail is a thin silver channel with a plastic release tab, it is the older Cover profile and you will want a slide kit matched to that rail, not a universal replacement.
For OEM versus aftermarket on Cover specifically: the cabinet boxes themselves are worth keeping OEM whenever possible. Aftermarket door fronts and drawer faces from a local shop can work, but the color match on Cover’s painted lines is hard to get right without a factory order. The cheaper aftermarket route that does hold up is the hardware: Blum-style hinges, soft-close slides, and nylon glides are all fine aftermarket choices if the mounting points line up with your existing drill pattern.
Styles & brands we work with
Signs Your Cover Kitchen Remodeling Is Failing
- A drawer closes with a push instead of a pull. The soft-close slide has worn past its retention point, or the nylon bumper at the back of the track has crumbled. This is the most common Cover failure we replace, and it usually starts on the drawer right next to the dishwasher.
- A cabinet door hangs at a slight angle. The hinge cup has wallowed out the particleboard on the door face. Cover’s older boxes used a lighter-density board at the hinge pad, and after a decade of Florida moisture, the cup loses its grip.
- You hear a soft pop when you open a door all the way. The hinge arm is no longer seated in the mounting plate. This one is easy to mistake for a loose screw. Tightening does not fix it because the plate has moved, not the screw.
- A drawer front has a hairline crack running down from the screw hole. The front is pulling away from the box. This happens on Cover drawers where someone added heavier contents and never adjusted the weight rating on the slides.
- The finish is peeling along the bottom rail near the sink. Water splash or a slow drip under the sink was never fully addressed. The substrate is swelling, and a repair means a new door or drawer front, plus sealing the end grain.
We stock the common Cover hinge, slide, and bumper parts in our West Palm Beach service vehicle, along with polyester and melamine edge banding for spot repairs. That means most single-part failures do not need a second appointment. Graham Stein still hits the job site to confirm the right part before any work starts.
Replacement Cost & What’s Included
For a part-level repair on a Cover kitchen in West Palm Beach, the range looks like this:
- Single hinge replacement with door removal and remount: $80 – $180
- One drawer slide replacement, soft-close matched to existing rail: $120 – $260
- Drawer front replacement with new pre-drilled front, painted to match: $220 – $450
- Cabinet box repair at the wall stud, including remount and shims: $300 – $650
- Full Cover kitchen remodel with replace doors, drawer fronts, and hardware: $14,000 – $45,000
The wider range on a full remodel is driven by two things: whether the cabinet boxes can be reused, and what the countertops are doing. If your Cover boxes are sound and only the doors and drawer fronts are tired, you land at the lower end. If the boxes are swollen at the hinge pads and the counters have to come off to pull them out, the number climbs. Every price is written down before the crew arrives, and nothing about the written number changes after the work starts.
Our workmanship warranty covers the part we install and the labor behind it for a year. The 365-Day Done Right Promise extends that: if it is not done right after the job is complete, we make it right. It is stamped on every project.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
On a Cover kitchen, there is a real split between what a homeowner should touch and what is better left to a background-checked crew. Checking a drawer for loose screws, confirming the model series from the label inside a drawer, and photographing the failed part before calling are all safe and useful. Replacing a hinge cup in a Cover door is not, and here is why: once the cup hole has ovaled out, the door face needs to be drilled for a repair bushing or the hole needs to be filled and re-drilled. Get that wrong and the drill walks through the face of the door, and a $12 hinge becomes a $300 door front. The same goes for side-mount slides. They have to be set at a exact height or the drawer rubs the frame and chews the finish.
If the part is heavier than a screwdriver job, call us at (728) 203-3270. We will identify the Cover part, quote the fix, and put the price in writing before the first tool is unpacked.
FAQs
In our West Palm Beach climate, Cover cabinet boxes give you 15 to 25 years when they are not exposed to standing water, but the hardware tends to need attention around the 10 to 14 year mark. The salt air near the Intracoastal and the humidity through the summer accelerate the wear on hinges and slides about twice as fast as a dry climate would. A hinge in a Flagler Drive home may need replacement five years before the same hinge in an inland neighborhood. Call (728) 203-3270 for an exact assessment on your kitchen.
It depends on where the failure is. A loose hinge cup can often be repaired with a two-part filler and a redrill, and that fix usually lasts as long as the original. A cracked door panel or peeling finish means replacement, because the structural material has failed. We stock matching Cover door fronts for the Shaker and Slab lines and can order a factory match when the paint code is still visible on the label inside the drawer box.
Most single-part swaps like a hinge or a drawer slide are done in under ninety minutes, including cleanup. A full door and drawer front replacement across a kitchen is usually two to three days of work, with the house left clean at the end of each day. We use quiet tools during family rest hours where possible, and shoe covers and drop cloths are on every job without being asked. Call (728) 203-3270 and we will walk you through the timeline for your specific kitchen.
We stock the fast-moving Cover parts on our West Palm Beach service vehicle: soft-close slides for the older rail profile, Blum-style hinges, nylon bumpers, and edge banding. Doors and drawer fronts are order-to-spec, usually two to three weeks from Cover or a local mill we trust for the painted match. If it is on the truck, we quote it and install it the same visit.
Call Elmstead Remodeling West Palm Beach
If your Cover kitchen has a failed hinge, drawer, or door and you want a price in writing before any work starts, call (728) 203-3270. We will schedule a walkthrough, identify the part, and hand you a written scope of work that names the materials and the labor. A live person answers the phone, day or night. Put it in writing, then do exactly that.
Written by Graham Stein, Owner, Elmstead Remodeling West Palm Beach at Elmstead Remodeling West Palm Beach, serving West Palm Beach and nearby areas.
