Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Windows & Doors: The West Palm Beach Owner’s Guide
We stock and install ActiveYards-compatible windows and doors throughout West Palm Beach, with most replacement jobs running $4,500 – $15,000 installed depending on size, series, and how many units we’re swapping. Same-week scheduling is typical once we confirm the exact model and glass spec. Most owners call us after a door starts dragging, a window won’t lock flush, or a frame shows water staining after a heavy summer storm.
What we see most in this market: the Florida sun and salt air work on frames and seals faster than the manufacturer’s average warranty window assumes. A door that worked perfectly for eight years suddenly needs a hip bump to latch. A window that opened smoothly now sticks at the halfway point. You notice it, you live with it for a few months, and then one day the heat pushes through and you call. That’s the normal sequence. We know exactly what happens next, because we’ve handled it in neighborhoods from Flamingo Park to the south end, near Southern Boulevard.
Graham Stein walks every ActiveYards replacement job site himself before we quote, because the failure is rarely just the part you can see. Water has a way of finding the one flashing seam that was never quite right. We price the fix in writing, with the part name, brand, and labor broken out, before any work starts.
Which ActiveYards Models This Applies To
ActiveYards products are built around a handful of frame series, and the parts don’t cross over as freely as you’d hope. The most common in West Palm Beach are the standard aluminum and vinyl frame doors and sidelight/transom window combinations, plus the screened enclosure hardware that ActiveYards is known for in Florida. Screen frames, door sweeps, rollers, handles, and hinge sets are specific to the frame profile. A roller assembly meant for a heavy sliding glass door won’t seat correctly in a standard ActiveYards screen door track, and forcing it is a guaranteed callback.
Here’s the practical way to identify what you have. Open the door or window, and look at the interior frame edge near the corner. ActiveYards stamps or stickers most production runs with a series code and a manufacture date, usually on the head or the hinge side. Take a photo of that stamp, plus one of the full unit and one of the failed part. That alone gets us 90% of the way to the right part before we arrive. If the sticker is gone, we measure the frame profile width and the roller or hinge mounting pattern on site.
For most ActiveYards parts, we recommend staying with OEM when the part is safety-related or the fit is tight: door hinges, rollers on heavy sliders, and lock mechanisms. For consumables like door sweeps, weatherstripping, and screen mesh, quality aftermarket equivalents from Florida suppliers hold up just as well and cost less. We’ll tell you which side of that line your part falls on, and why.
Styles & brands we work with
Signs Your ActiveYards Windows & Doors Are Failing
- Door drags or catches at the bottom edge. The roller assemblies are worn flat or the track has collected sand and grit. In West Palm Beach, fine beach sand works its way into roller bearings and grinds them down faster than anywhere inland.
- Window won’t lock flush without lifting or pulling. The frame has shifted slightly, or the keeper is misaligned. On ActiveYards units this often traces back to a worn hinge or a settling threshold, not the lock itself.
- Condensation or haze between glass panes. The insulated glass unit seal has failed. Once the seal goes, the gas fill escapes and the glass loses its thermal performance. Florida humidity makes this show up fast.
- Water staining on interior walls near a window corner. The flashing or caulk has opened up. Even a small gap lets wind-driven rain in during summer storms, and by the time you see the stain, the leak has been active for a while.
- Handle spins without engaging the latch. The internal spindle or gear is stripped. This is a common ActiveYards failure on doors that get heavy daily use, especially in houses with kids and a dog going in and out all afternoon.
Replacement Cost & What’s Included
In West Palm Beach, ActiveYards window replacement runs $4,500 – $15,000 installed depending on how many units, what glass package you choose, and whether frame repair is involved. A single door swap usually lands on the lower end of that range. A full door-and-sidelight assembly runs higher, because we’re also correcting the rough opening and re-flashing everything properly.
Every quote is a written line-item price: the part by name and quantity, labor, disposal, and any trim or flashing work. No allowances, no lump-sum guess. The 365-Day Done Right Promise covers our workmanship on every window and door we install. If something isn’t right after the job, we come back and make it right. That promise is stamped on every project we take on.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
There are a few things an owner can safely check before calling. Clean the track. Tighten visible screws on the hinge. Look at the weatherstripping. None of that requires tools beyond a screwdriver and a rag, and sometimes it solves a sticky door long enough to plan the real fix.
What you shouldn’t do is attempt to replace rollers, hinges, or lock sets on a heavy ActiveYards door yourself. These doors carry real weight, and a door that comes off its track during a DIY attempt is genuinely dangerous. The same goes for any window or door that requires removing the frame or touching the flashing. That’s not a handyman job. It’s a job for someone who knows what’s behind that exterior wall in a Florida house. Call us at (728) 203-3270 and we’ll send someone who does.
FAQs
In West Palm Beach, we typically see ActiveYards frames last 12 – 18 years before major part failure, with rollers, sweeps, and seals needing replacement every 4 – 7 years depending on sun exposure and salt proximity. Coastal homes near the intracoastal tend to chew through seals and hardware faster. Call (728) 203-3270 for an inspection and we’ll tell you exactly where your units stand.
Rollers, handles, sweep seals, weatherstripping, and screen mesh can usually be repaired or replaced individually. Frame rot, failed insulated glass, or a bent track usually means replacement. We’ll always tell you the cheaper of the two valid options, and we’ll put it in writing before touching anything.
Most single-unit ActiveYards replacements are a same-day job once the part is in hand. A full door-and-sidelight replacement usually runs two days with proper flashing and trim. We’ll give you a firm start and end window before the crew arrives.
We keep the most common ActiveYards rollers, handles, sweeps, and seal kits on the truck for this market, and anything we don’t carry is usually sourced from Florida distributors within a few days. We also work with parts for KraftMaid, Cambria, and Silestone when the job crosses from doors into millwork or countertops.
Call Elmstead Remodeling West Palm Beach
If your ActiveYards window or door is failing, call (728) 203-3270. We’ll identify the exact part, give you a written price that won’t move once the crew arrives, and schedule the work around your family’s routine. Shoe covers at the door, drop cloths on the floors, quiet tools during nap hours, and a photo of the clean-up before we leave. Put it in writing, then do exactly that.
Written by Graham Stein, Owner, Elmstead Remodeling West Palm Beach at Elmstead Remodeling West Palm Beach, serving West Palm Beach and nearby areas.
