Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Kitchen Remodeling: The West Palm Beach Owner’s Guide
Jerith kitchen remodeling in West Palm Beach typically runs $14,000 – $45,000 installed, depending on whether we’re addressing a failed component or rebuilding the full kitchen around your existing Jerith product. Most owners call us after a specific failure: a drawer front that no longer sits flush, a hinge that’s stripped, a cabinet frame pulling away from the wall after years of Florida humidity. The good news is we carry Jerith-compatible hardware and replacement components on our trucks, and we give you a written price before any work starts.
Here’s what we see most often in West Palm Beach kitchens: the original Jerith cabinetry is structurally sound, but decades of moisture from cooking, dishwashing, and our relentless summer humidity have taken their toll on hinges, drawer glides, and laminate edges. You don’t always need a new kitchen. Sometimes you need the right part, matched to your exact Jerith configuration, installed by someone who knows how Jerith boxes are built.
Key Takeaways
- Jerith kitchen remodeling in West Palm Beach: $14,000 – $45,000 installed, depending on scope.
- We stock Jerith-compatible hinges, drawer glides, and touch-up materials on our service trucks.
- Elmstead Remodeling West Palm Beach is an independent contractor, not affiliated with Jerith.
- Written price before any work starts, every time, on every project.
- 365-Day Done Right Promise: if it’s not done right, we make it right.
Which Jerith Models This Applies To
Jerith manufactured kitchen cabinetry across several lines over the years, and the compatibility picture is not as simple as “one part fits all.” If you have the original paperwork, look for a cabinet label inside the sink base or a code stamped on the drawer box. If you don’t, we can identify the series by hinge style and drawer glide type during the estimate visit. Older Jerith lines used a 3/8-inch lip hinge with a specific overlay measurement; newer boxes moved to concealed cup hinges with a different bore pattern. The wrong part will look close and install poorly.
For Jerith specifically, we favor OEM-style replacement hardware over generic aftermarket pieces when the cabinet is still square and the original part failed from normal wear. The mounting hole spacing and door overlay are matched to the line, and a generic hinge can leave a door sitting proud or rubbing. Where Jerith switches, catches, or drawer glides are no longer available through original channels, we source quality equivalents with the same load rating and hole pattern, then test the full range of motion before we call the job done. We also stock KraftMaid, Cambria, and Silestone hardware and touch-up kits when your kitchen mixes brands, which happens more often in West Palm Beach than you’d think after years of piecemeal updates.
Styles & brands we work with
Signs Your Jerith Kitchen Remodeling Is Failing
- Drawer fronts that droop or rub: The glide has worn or a mounting screw has pulled from the box. In West Palm Beach, humidity swells the wood slightly, so a glide that was marginal last winter becomes a full rub by August.
- Hinges that won’t hold adjustment: The screw holes are stripped or the hinge knuckle is worn. This is the single most common Jerith failure we see, and it’s almost always repairable with the right repair plate or a matched replacement hinge.
- Laminate peeling at edges: This is moisture intrusion, plain and simple. Florida kitchens see more of it than almost anywhere else in the country. The fix is re-adhesion and edge sealing, not a whole new cabinet.
- Cabinet boxes pulling from the wall: Usually the original install used the wrong fastener for the wall type, or the wall has settled. We find this in older Flamingo Park homes where plaster and lathe don’t hold standard screws the way drywall does.
- Soft-close mechanisms that slam: The damper has failed, not the hinge. On most Jerith lines the damper can be replaced separately, which is a fraction of the cost of new hinges.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full kitchen remodel in West Palm Beach built around your existing Jerith footprint, the range is $14,000 – $45,000. Where you land depends on how much of the original structure stays. A parts-focused repair, like replacing all hinges and glides and re-laminating damaged edges, sits at the bottom of that range. Replacing the cabinet boxes but keeping your Jerith doors and drawer fronts lands in the middle. Taking the kitchen to the studs with new cabinetry, counters, and fixtures pushes toward the top.
| Scope | West Palm Beach Installed Price |
|---|---|
| Hinge and glide replacement (full kitchen) | $1,200 – $3,500 |
| Cabinet refacing with Jerith-compatible doors | $9,000 – $20,000 |
| Cabinet installation (new boxes) | $4,000 – $13,000 |
| Countertop installation (Cambria, Silestone, or equivalent) | $2,000 – $6,500 |
| Full Jerith-compatible kitchen remodel | $14,000 – $45,000 |
Every line is written down before the work starts. Labor, parts by brand and quantity, a firm start and end window. No estimate that grows after the crew arrives, no change orders slipped into the middle of the job. The 365-Day Done Right Promise covers the completed work: if it’s not done right, we make it right.
DIY or Call Us?
Some things you can safely check yourself: whether a hinge screw is loose, whether a glide is visibly bent, whether a soft-close damper is cracked. Tightening a loose screw is fine. Re-hanging a cabinet door is fine if you have a second set of hands. Where DIY goes wrong on Jerith cabinetry is when the screw hole is stripped and someone reaches for a longer screw that punches through the face, or a generic hinge that doesn’t match the overlay. We’ve repaired enough of those to know it costs less to do it right the first time.
There are no high-tension springs or electrical hazards in cabinet hardware work, so this is not a safety-risk DIY situation. It’s a “will this part actually match and will the door close square” situation. That’s where fifteen years of kitchen teardowns and rebuilds in West Palm Beach pays off. If you want a matched part installed the way Jerith built the box in the first place, call (728) 203-3270. We’ll come take a look and put the fix in writing.
FAQs
Jerith cabinet boxes can last 30 years or more if they’re kept dry and the hardware is replaced as it wears. The weak points in Florida are hinges, glides, and laminate edges, all of which are replaceable. Call (728) 203-3270 and we’ll tell you honestly whether your kitchen has another decade in it or it’s time to rebuild.
Yes, in most cases. Stripped hinge holes, worn glides, failed soft-close dampers, and peeling laminate are all repairable with matched parts. Replacement only makes sense when the box itself is water-damaged or the original layout no longer works for your family. The estimate visit will give you a written price either way.
A full-kitchen hinge and glide replacement usually takes one to two days, depending on how many drawers and doors we’re doing and whether we need to fill and redrill stripped holes. We schedule around your family’s quiet hours where we can, and we leave shoe covers on and drop cloths down until the last screw is set.
We keep Jerith-compatible hinges, drawer glides, dampers, mounting plates, and repair plates on our trucks, along with touch-up and edge-sealing materials. If your kitchen needs something line-specific that we don’t carry, we order it before the work starts and put the timeline in the written scope. Call (728) 203-3270 and we’ll tell you what we have on hand for your model.
Written by Graham Stein, Owner, Elmstead Remodeling West Palm Beach at Elmstead Remodeling West Palm Beach, serving West Palm Beach and nearby areas.
