







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Driveway & Pavers: The West Palm Beach Owner’s Guide
Elmstead Remodeling West Palm Beach stocks and installs Mr-Glass-compatible paver driveway components and full driveway systems, with typical installed paver driveway work in West Palm Beach running $7,000 to $18,000 depending on square footage, base condition, and pattern. Most owners reach out after a section of pavers shifts or sinks, an edge restraint pulls away, or a stain set into the surface that no amount of pressure washing budged. We keep common replacement pavers, edge restraints, joint sand, and sealer on the truck so a failing section can be addressed in one visit rather than two.
What we tend to find in West Palm Beach specifically: the combination of sandy base soil, heavy summer rain, and heat-cycling causes paver driveways here to fail differently than they do further north. Edges spread, sand washes out of joints, and low spots collect water that slowly undermines the base. A Mr-Glass owner noticing pavers wobbling underfoot is usually seeing the early stage of base erosion, not just a cosmetic problem.
Which Mr-Glass Models This Applies To

Mr-Glass driveway and paver systems come in a few series lines, and the compatibility gotcha we see most often is that early-generation units used a thinner paver profile than current production. If your driveway was installed before roughly 2015, the replacement pavers you order need to match the original thickness, not just the face dimensions and color. Mixing a 60mm paver into a 40mm field creates a lip every tire will catch.
To identify your specific Mr-Glass line, check the back of a removed paver for a mold stamp: the series number is usually a two-letter code followed by a digit. If the stamp has worn off, measure the paver’s thickness and face size and bring a photo of the surface texture to us. We can usually match it from that alone. For current-production Mr-Glass systems, OEM pavers remain available for most colors, and there are quality aftermarket equivalents from Florida-based manufacturers that match within an acceptable tolerance. We’ll be straight with you about which is worth paying for on your particular driveway: for high-traffic areas and the first course along the street, OEM holds up better in South Florida UV exposure.
Styles & brands we work with







Signs Your Mr-Glass Driveway & Pavers Is Failing
- Wobbling or rocking pavers underfoot. This is almost always base sand erosion underneath the paver, not the paver itself. Left alone in West Palm Beach’s rainy season, the wobble spreads as water moves the sand further out from under the field.
- Edge pavers drifting outward or separating from the border. The edge restraint has failed or was never installed deeply enough. Florida storms put real lateral pressure on paver edges, and once the first course shifts, the rest of the field is free to follow.
- Low spots that hold water after any decent rain. A Mr-Glass driveway should shed water within an hour of a storm clearing. Persistent puddles mean the base has settled unevenly, often where a vehicle repeatedly parks.
- Weeds or grass pushing up through joints in odd patterns. This is less about the weeds and more about what’s missing: joint sand has washed out and been replaced by organic matter. The fix is removing the growth, cleaning the joints, and installing polymeric sand that resists both weeds and Florida downpours.
- White, chalky haze or dark staining that survives pressure washing. Chalk is UV degradation of older sealers or the paver surface itself. Dark stains are usually organic growth or oil that has penetrated the paver. Both are common in the West Palm Beach heat, and both point to a driveway that needs a re-clean, joint refill, and re-seal rather than full replacement.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For most Mr-Glass driveway work in West Palm Beach, full paver driveway installation runs $7,000 to $18,000. Partial repairs like re-leveling a settled section, replacing broken pavers, or re-establishing edge restraints typically fall between $800 and $3,500 depending on how much area is involved and how far the base has degraded. Sealing a full driveway runs $250 to $700 for a standard two-car drive, with the range driven by paver condition and whether we’re stripping old failed sealer first.
Every Elmstead Remodeling West Palm Beach quote includes the written price before any work starts, itemized by materials and labor. Our paver work always includes shoe covers and drop cloths where the crew transitions through the home, a photo of the finished and cleaned job site before the crew leaves, and the 365-Day Done Right Promise: if the repair fails or the pavers shift again inside a year, we come back and make it right at no charge. No change orders drift in. No surprises at the end.
DIY or Call Us?
There are a few things a Mr-Glass owner in West Palm Beach can safely handle themselves: pulling small weeds between pavers before they root deep, sweeping sand into mostly-empty joints, and rinsing the surface with a garden hose on a low setting. What owners should not attempt alone is lifting and re-setting pavers, trying to fix a settled base with bagged sand from a hardware store, or pressure washing their own Mr-Glass surface. Too much pressure strips the paver face and leaves permanent swirl marks; too little does nothing but push water into the base. The same goes for sealing: Florida humidity sets the working window, and sealing over trapped moisture locks in a white haze you’ll look at for years.
If the pavers are shifting, the edge is spreading, or a stain has set deeper than the surface, call us at (728) 203-3270. We’ll come out, tell you honestly whether it’s a repair or a replacement, and put the written price in your hands before anything gets scheduled.
FAQs

A properly installed Mr-Glass paver driveway in West Palm Beach should last 25 to 30 years before the pavers themselves show meaningful wear, but the base and edge restraints typically need attention every 8 to 12 years due to Florida’s sand soil and heavy seasonal rain. The pavers usually aren’t the first thing to fail; the base is. Call (728) 203-3270 and we’ll assess what’s actually failing on yours before recommending anything.
Yes, individual pavers can be pulled and replaced, and small settled sections can be lifted, re-based, and re-leveled without touching the rest of the driveway. A repair makes sense when the issue is localized; full replacement becomes the right call when the base has settled in multiple places, edges have spread on both sides, or more than a third of the field is moving. For an honest read on your driveway, call (728) 203-3270.
A small repair, like re-leveling a settled section or replacing a handful of pavers, is usually a one-day job in West Palm Beach. A full driveway replacement is typically three to five working days, with a day at the front for demo and base prep and time at the end for joint sand, compaction, and sealing. We schedule around your family’s quiet hours where possible.
We stock replacement pavers matching the most common Mr-Glass thicknesses and colors, along with edge restraints, polymeric joint sand, and sealers approved for South Florida UV exposure. If your particular color or series needs a special order, we tell you the lead time and cost before you commit to anything. Call (728) 203-3270 with a photo of your paver face and we’ll confirm a match.
Written by Graham Stein, Owner, Elmstead Remodeling West Palm Beach at Elmstead Remodeling West Palm Beach, serving West Palm Beach and nearby areas.


