Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Fence Installation: The West Palm Beach Owner’s Guide
CGI fence installation in West Palm Beach typically costs $3,500 to $9,000 for a full perimeter, depending on linear footage, gate hardware, and whether your existing posts can be reused. We stock CGI-compatible panels and matching post components on our trucks, and our crew can usually complete a standard residential installation in two to three working days. Most owners call us after a storm has loosened a panel, a gate has started dragging, or salt air has finally caught up with the fasteners along the bottom rail.
What you should know before you go further: we are an independent contractor in West Palm Beach. We install and service CGI fence systems, but we are not affiliated with the manufacturer. That separation matters because it means our recommendations on replacement parts are honest, not driven by a brand rep.
Which CGI Models This Applies To
CGI fence components are not one-size-fits-all. The panel dimensions, post profiles, and gate hinge spacing vary between CGI’s commercial, residential, and pool-code lines. Before you order anything, look for the manufacturer’s label on the interior face of the top or bottom rail. If the label is faded or missing, measure the panel’s overall height and the spacing between horizontal rails, then compare against CGI’s published cut sheets. A half-inch difference matters more than it looks like it should.
For most West Palm Beach homes, we are working with CGI’s residential aluminum or steel panels in either 4-foot or 6-foot heights to satisfy local pool-barrier and sight-line requirements. The OEM decision comes down to finish matching. If your fence has eight years of sun on it, a brand-new panel will not match, even with the same color code. In those cases, we will often recommend a quality aftermarket panel in the same gauge and profile, then prep and paint the entire section so the repair disappears. If the fence is under three years old, OEM is the right call and we order direct.
Styles & brands we work with
Signs Your CGI Fence Installation Is Failing
- Panels rattling in the wind after a storm. This usually means the self-tapping screws have stripped their threads inside the post. The fix is a wider-gauge screw with a dab of anti-seize, not just tightening what’s already there. Tightening a stripped screw gives you about two weeks of quiet.
- Gate dragging or catching on the latch side. West Palm Beach’s sandy soil shifts gate posts over time. The hinge side sinks a quarter inch, the latch side drops, and suddenly the gate only opens with your shoulder behind it. This is a post reset or a hinge re-shim, not a new gate.
- White or gray powder on the rails or posts. Salt air and pool chemicals accelerate oxidation on powder-coated aluminum. Early-stage corrosion looks like a dull film. Late-stage looks like bubbling paint with pinholes underneath. Catching it early means a sand and re-coat; missing it means panel replacement.
- Fence post moving when you push on it. If a post flexes at the base, the concrete footing has likely cracked or eroded below grade. In sandy West Palm Beach lots, we occasionally find the footing was poured too shallow in the first place, and water has slowly undermined it.
- Screws snapping off at the rail-to-post connection. When the original installer over-torqued the fasteners, the metal fatigues over time. One snapped screw is an annoyance. Three snapped screws on the same panel is a warning that the entire section’s fasteners are compromised.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full CGI fence installation in West Palm Beach runs $3,500 to $9,000. A partial section replacement, like one 8-foot panel with two posts, typically falls between $450 and $1,200. A gate rebuild with new hinges, latch, and drop rod is usually $300 to $800, depending on whether we are resetting posts or pouring new footings.
What drives the range is linear footage first, then the condition of what you already have. We can reuse existing posts only if they are plumb, solid at the base, and free of corrosion. If we are pulling posts, pouring new footers, and re-hanging panels, that is a larger job. Our written price covers parts, labor, haul-away of the old material, and cleanup. You will know the number before we unload a single tool, and it will not change after we start. If a repair does not hold up the way it should, the 365-Day Done Right Promise means we come back and make it right.
For a written quote on your specific fence, call (728) 203-3270. The estimate is free and the price is fixed before work begins.
DIY or Call Us?
You can safely do a visual inspection: look for missing screws, check whether panels are level, and push gently on each post to see if it moves. You can also shoot a little silicone spray into a squeaky hinge. Those are reasonable homeowner tasks that cost you nothing.
What you should not do is try to reset a fence post, re-tension a gate, or replace a panel on a fence that borders a pool. A gate that does not close and latch properly is a safety code violation in West Palm Beach, and a fence panel under wind load is heavier than it looks when it comes off the post. We have taken apart enough DIY fence repairs to know how quickly a pinch point turns into a trip to urgent care. If the issue involves a post, a gate, or anything structural, call us at (728) 203-3270. We will look at it, give you a written price, and do the work with the right tools and the right hardware.
FAQs
A CGI aluminum fence installed correctly in West Palm Beach typically lasts 15 to 25 years, with the finish and fasteners being the first things to show age. Steel components fail faster near the coast. Regular washing and checking fasteners every couple of years extends that lifespan significantly. If you are unsure about the condition of your fence, call (728) 203-3270 and we will walk it with you.
Panels with minor dents or scratches can usually be repaired with body filler and a color-matched re-coat, at a fraction of replacement cost. Panels with structural damage, like a snapped rail or torn post connection, should be replaced for safety. Call (728) 203-3270 and we can tell you which category yours falls into.
A standard residential CGI fence installation in West Palm Beach takes two to three working days, including post removal, new footings, panel installation, and gate hardware. A partial repair or panel swap is often done in a single morning. We will give you a firm start and end window in your written estimate.
We keep common CGI-compatible panels, post caps, fasteners, and gate hardware on our trucks for most residential applications, and we can order specific OEM parts for newer or less common CGI models. The same goes for adjacent brands like KraftMaid, Cambria, and Silestone when a fence job touches an outdoor kitchen or pool surround. Call (728) 203-3270 with your model details and we can confirm availability before we arrive.
Written by Graham Stein, Owner, Elmstead Remodeling West Palm Beach at Elmstead Remodeling West Palm Beach, serving West Palm Beach and nearby areas.
