Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Kitchen Remodeling: The West Palm Beach Owner’s Guide
PGT kitchen remodeling in West Palm Beach typically runs $14,000 – $45,000 installed, depending on whether you’re replacing a failed cabinet run, rebuilding after water damage, or doing a full tear-out with new counters and fixtures. Most owners call us after a specific failure: a delaminated cabinet box near the sink, a counter seam that’s opened up from humidity, or hinges that no longer hold a door straight. We stock PGT-compatible hardware and trim on the truck, and we can usually match your existing finish without replacing cabinets that are still sound.
What usually brings a homeowner to this page is a part that gave out quietly. A drawer glide that started catching six months ago. A soft-close hinge that stopped closing at all. A laminate edge that lifted near the dishwasher. By the time it’s obvious, the fix is rarely just one part, but it’s also rarely a full kitchen. That’s the part we’re good at sorting out.
Which PGT Models This Applies To
PGT’s kitchen line spans entry-level builder-grade cabinets through semi-custom frameless boxes, and the hardware varies by series. The WinGuard and Spectra lines use a different hinge plate than the older PGT 7700 series, and mixing them is how doors end up crooked even when the new hinge is the “right” brand. If you still have the original cabinet label, it’s usually inside the sink base door or on the back of a drawer box. The label carries the series code and the finish name, and that finish name matters more than the model number when you’re trying to match a door or a panel.
On OEM versus aftermarket: for hinges, slides, and soft-close mechanisms, we use Blum and Grass parts where possible. They’re the same manufacturers PGT specified on many lines, and they’re available without the PGT markup. For doors, panels, and matching trim, we go OEM or have the piece milled to match the existing finish. West Palm Beach humidity is the variable that matters most here. A particleboard core that lasted 12 years in a dry climate will swell and split in 8 here, especially under a sink or next to a dishwasher vent. That’s not a PGT defect. That’s Florida.
We also work with KraftMaid, Cambria, and Silestone for replacement surfaces when a PGT cabinet box is still sound but the counter or sink deck needs to go.
Styles & brands we work with
Signs Your PGT Kitchen Remodeling Is Failing
- Doors that won’t stay closed or hang at an angle. The hinge plate has worn or the screw holes in the cabinet face have stripped. In West Palm Beach’s humidity, MDF and particleboard faces soften over time, and the screws lose their bite.
- Drawers that stick, sag, or scrape. The glide has lost its ball bearings or the drawer box itself has swollen. If you see fine gray dust under the slide, the bearing race is done.
- Swollen or darkened cabinet box panels near the sink or dishwasher. Water has gotten past the edge banding and into the core. This is the most common PGT failure we see in West Palm Beach kitchens, and it usually means the box needs replacing, not just the door.
- Soft-close hinges that slam or don’t catch. The internal damper has failed. Replacing the damper is cheaper than replacing the hinge, but if the hinge is original to a 15-year-old kitchen, replace both while you’re in there.
- Laminate or thermofoil edges lifting from the door face. Heat from the oven or dishwasher venting breaks down the adhesive. Once the edge lifts, water gets in, and the door swells from the edge inward.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In West Palm Beach, a PGT kitchen fix ranges from a few hundred dollars for hinge and glide replacement to $14,000 – $45,000 for a full kitchen remodel with new cabinet boxes, counters, and fixtures. Where your job lands depends on how much of the existing kitchen is still worth saving. We’ve done jobs where three cabinet boxes were replaced and the rest of the kitchen stayed. We’ve done jobs where the boxes were fine but every hinge and glide was shot.
Every Elmstead job in West Palm Beach gets a written price before any work starts. That price lists labor, materials by brand and quantity, and the start and end window. The 365-Day Done Right Promise covers the work when it’s complete. If it’s not done right, we make it right. No change orders after the crew arrives. No estimates that grow.
DIY or Call Us?
Cabinet hardware is light tension, not high tension. You can safely check whether a hinge plate is loose, whether a glide is clogged with dust, and whether a soft-close damper is visibly cracked. What goes wrong in West Palm Beach kitchens is the box itself. Once a particleboard core has swollen, no amount of hinge adjustment fixes it, and forcing doors straight will strip the screw holes faster. The honest split: hardware can be a Saturday project. Cabinet boxes, water-damaged panels, and anything involving a countertop seam are worth a phone call.
If you’re in West Palm Beach and want a straight answer about whether your PGT kitchen is worth fixing or replacing, call (728) 203-3270. We’ll walk the job, tell you what’s actually wrong, and hand you a written price before anything gets ordered.
FAQs
Expect 10 – 15 years for PGT cabinet boxes in our humidity before the sink base or dishwasher-adjacent panels start to fail. Hinges and glides usually need replacing at the 8 – 10 year mark, even if the boxes are still solid. Call (728) 203-3270 and we’ll tell you which side of that line your kitchen is on.
Yes, when the failure is hardware or a single box. We replace hinge plates, glides, dampers, and edge banding regularly. When the cabinet box itself has swollen from water, repair is a temporary fix, and we’ll say so before quoting one. Call (728) 203-3270 for an honest assessment.
Hinge and glide replacement is usually a one-day job. Swapping a cabinet box takes two to three days including finish matching. A full kitchen remodel runs four to eight weeks depending on countertop fabrication. We’ll put the timeline in writing with the price.
We stock common hinges, glides, dampers, and trim on the truck for PGT-compatible hardware. For doors, panels, and finish-matched pieces, we order from the manufacturer or have the piece milled locally, which usually adds three to five business days. Call (728) 203-3270 and we’ll tell you what’s on hand today.
Written by Graham Stein, Owner, Elmstead Remodeling West Palm Beach at Elmstead Remodeling West Palm Beach, serving West Palm Beach and nearby areas.
