Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Roofing: The West Palm Beach Owner’s Guide
If you have a Boral roof tile or component that has cracked, slipped, or worn through, we can source the matching piece and install it properly. Installed repair work on Boral roofing in West Palm Beach typically runs $400 – $1,800 depending on how many tiles are involved and whether the underlayment beneath them needs attention. Most Boral failures we see start small: a hairline crack after a storm, a tile that shifted during the last hurricane season, or flashing that finally gave out after fifteen years of salt air and afternoon downpours. Elmstead Remodeling West Palm Beach is an independent contractor, not a Boral dealer, but we work with Boral-compatible materials every month and can match your existing roof profile closely.
Which Boral Models This Applies To
Boral’s roofing line in the Florida market centers on concrete and clay tile profiles: the Barcelona, Capistrano, Verona, and Saxony series, plus the flat-profile Mission and the flatter “barrel-lite” options that dominate newer West Palm Beach construction. The gotcha most homeowners hit: Boral tile dimensions are not universal across series. A Barcelona tile is not the same width or profile as a Saxony tile, even though both look similar from the ground. If you install the wrong series, the lap pattern breaks and water finds a way through. Before we touch anything, we check the underside of a removed tile for the stamped series code and measure the tile’s exposed width and profile depth against Boral’s published specs. Aftermarket equivalents exist and can save money, but for a visible patch on the front slope, we recommend OEM Boral tiles to keep the color and texture consistent. For the back slope or an attic-facing section, a quality aftermarket match is usually fine. We also stock common Boral-compatible ridge caps, hip starters, and bird stops, and we can order niche trim pieces without holding up the job.
Styles & brands we work with
Signs Your Boral Roofing Is Failing
- Cracked or chipped tiles after a storm. Concrete tiles can take a lot, but a direct hit from a wind-thrown branch or a pressure-wash at the wrong angle leaves fractures. A cracked tile lets water sit against the underlayment, and in West Palm Beach’s rainy season, that underlayment rots faster than most homeowners expect.
- Slipped or misaligned tiles. This is common in older Boral installs where the original fasteners have corroded. South Florida humidity and coastal salt air wear down galvanized clips and nails faster than inland climates. A slipped tile leaves the waterproof layer exposed to direct sun and rain.
- Tile dust or granules in the gutters. Boral concrete tiles shed surface material as they age. Some dust is normal, but a consistent stream of grit in one section usually means freeze-thaw damage or long-term water absorption has weakened the tile’s surface.
- Water stains on the ceiling or soffit. By the time you see a stain inside, the failure has been active for a while. Boral’s interlocking design is good, but no tile system is waterproof without the underlayment beneath it. We trace the stain back to the specific tile or flashing joint that opened up.
- Rusted or lifted flashing at valleys, chimneys, or skylights. Flashing failure is the number one cause of Boral roof leaks in West Palm Beach, not tile failure. Salt air, UV exposure, and the constant expansion and contraction of a hot roof deck break the seal over time. The fix is replacing the flashing and bedding the surrounding tiles back into fresh mortar or adhesive.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Boral tile repair in West Palm Beach, a straightforward swap of one to ten tiles runs $400 – $1,200. If the underlying underlayment has to be peeled back and replaced around a valley or penetration, the job lands in the $800 – $1,800 range. The main cost drivers are roof pitch (a two-story, steep roof takes more time and safety rigging), series type (OEM Boral is pricier than aftermarket), and whether we are matching color on a sun-faded slope. Every Boral repair quote from us is a written, itemized price: the tiles or trim pieces by series and quantity, the underlayment and fasteners, the labor hours, and the cleanup. We give that written price before any work starts, and it does not change once the crew arrives unless we uncover damage that was genuinely hidden and you approve the difference first. Our workmanship is covered under the 365-Day Done Right Promise: if the repair is not done right, we come back and make it right.
DIY or Call Us?
What you can safely check: visible cracks from the ground with binoculars, slipped tiles you can see from the driveway, and granule buildup in your gutters. What you should not do: walk a Boral concrete roof. These tiles are dense but brittle at the edges, and a misplaced foot on the wrong section cracks more tiles than it fixes. It is also a fall risk, and no tile replacement is worth a trip to the emergency room. If the damage is limited to one or two tiles on a single-story roof and you are comfortable on a ladder, a skilled homeowner can sometimes swap a matching tile with the right adhesive. But for anything involving flashing, underlayment, valley work, or a steep pitch, call us at (728) 203-3270. Graham Stein walks every Boral roof himself before quoting, so you are not guessing about what is actually wrong up there.
FAQs
Boral concrete tile roofs in the West Palm Beach climate typically last 40 to 50 years when the underlayment is replaced on schedule, usually every 20 to 25 years. The tiles themselves can outlast the underlayment beneath them, which is why so many Boral repairs involve replacing felt and flashing while keeping the original tiles. Call (728) 203-3270 for an inspection if your roof is past the 20-year mark.
In most cases, a cracked Boral tile should be replaced, not patched. Hairline fractures in concrete tile can sometimes be sealed with a quality roofing adhesive, but the fix usually fails within a few seasons because the tile continues to flex with temperature changes. Replacement is the honest long-term fix. Call (728) 203-3270 and we will tell you which route makes sense for your specific tile.
Most Boral tile repairs in West Palm Beach take between two and five hours, including removal, replacement, underlayment work if needed, and cleanup. If we have to order OEM tiles for a color match, the job waits on the material and not on us. We give you that timeline in writing before work begins.
We keep common Boral profile tiles, ridge caps, and starter pieces in stock for same-week repairs throughout West Palm Beach, and we can order series-specific OEM Boral pieces if your roof needs something outside our standard inventory. Our other in-stock lines include KraftMaid, Cambria, and Silestone materials for interior work, but Boral-compatible roofing is our primary outdoor stock. Call (728) 203-3270 and we will verify availability for your series while you are on the phone.
If your Boral roof is showing any of the signs above, or if you just want a measured look at what is going on before you decide anything, call (728) 203-3270 for a free estimate. Put it in writing, then do exactly that.
Written by Graham Stein, Owner, Elmstead Remodeling West Palm Beach at Elmstead Remodeling West Palm Beach, serving West Palm Beach and nearby areas.
