Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why West Palm Beach Homeowners Choose ES Windows Construction
We provide independent ES Windows construction, repair, and installation service throughout West Palm Beach, from historic Flamingo Park bungalows to Intracoastal condos off Flagler Drive. Our crews work on ES Windows 500, 700, 800, and 900 Series products every week, so we know the hardware, gaskets, and corrosion points specific to this salt-air climate without relying on manufacturer backing. We’re not an authorized ES Windows dealer, and we don’t pretend to be one. What we are is a local crew that has learned these windows inside and out by taking them apart, fixing what fails, and putting them back right. Call (728) 203-3270 to talk through what you’re seeing.
The housing stock here runs the full spectrum. Some of our service calls take us to 1920s-era homes in El Cid with original wood framing and retrofit window openings. Others are 1960s mid-century ranches in Northwood Hills. And plenty are newer concrete block homes built to Miami-Dade High Velocity Hurricane Zone standards. ES Windows appear in all of them, which is why Graham Stein and our Elmstead Remodeling West Palm Beach crew have spent years learning the specific ways these products age in coastal Florida.
Why Trust Elmstead Remodeling West Palm Beach for Your ES Windows Construction?
Graham Stein grew up in Los Angeles, learned the trade at Los Angeles Trade-Technical College, and spent decades working construction up and down the West Coast before settling his crew into the West Palm Beach market. He still walks every job site himself before a single drop cloth goes down. That matters when you’re dealing with ES Windows hardware, because the difference between a window that operates smoothly and one that binds comes down to small things: roller alignment, track condition, gasket seating, and frame squareness.
Our technicians inspect ES Windows products the way the manufacturer’s spec sheets describe, then go further and check what coastal Florida actually does to them. Salt mist off the Intracoastal corrodes aluminum weep holes and corner joints. Daily slider operation in high humidity wears rollers and tracks faster than inland homes. Hurricane wind loads stress operator arms and hinges on casement models. We know these failure patterns because we see them every week in neighborhoods from Northwood Hills to Southland Park.
Every job starts with a written scope of work. Itemized labor, materials by brand and quantity, and a firm start and end window. Put it in writing, then do exactly that. It’s how Graham runs every project, and it’s how our ES Windows service calls work too.
Styles & brands we work with
Common ES Windows Construction Problems We Fix in West Palm Beach
Here’s what we actually find when homeowners call us about ES Windows issues in this city:
- Salt-air corrosion on 500 Series aluminum single-hungs. The weep holes at the bottom corners clog with salt and mineral deposits, trapping water inside the frame channel. Over time the aluminum pits, the glazing gasket shrinks, and you get air leaks and condensation between the panes. We clean the channels, replace the gaskets, and treat the frame to slow future corrosion.
- 800 Series horizontal slider rollers and tracks wearing out. These sliders are workhorses in West Palm Beach homes, but daily operation in humid, salty air grinds the nylon rollers down and pits the aluminum tracks. The window starts sticking, then derails entirely. We rebuild the track channels and replace rollers with heavy-duty aftermarket sets that match the original specs.
- 700 Series casement operator arms stripping under wind load. Casement windows take the brunt of coastal gusts. After years of storm seasons, the operator gears strip and the crank spins without moving the sash. The arm itself can bend or snap at the pivot. We replace operators and realign hinges so the sash closes flush against the frame and seals properly.
- 900 Series impact-rated fixed picture windows developing seal failure. Impact glass is built for hurricanes, but the insulated glass unit seal can still fail after years of sun and humidity exposure. You’ll see fog or condensation between the panes that won’t wipe off. We source replacement IGUs to spec and install them without disturbing the impact frame.
- Weep hole blockage and frame pitting on any ES Windows aluminum product near the Intracoastal. Homes off Flagler Drive and along the waterfront corridors get constant salt mist. We recommend yearly weep hole cleaning and track lubrication for these locations. It’s cheap prevention against a $600 – $1,800 frame section repair later.
Our tech drove out to a 1970s condo off Flagler Drive where two ES Windows 800 Series sliders wouldn’t move. Rollers had disintegrated and the aluminum tracks were pitted from years of salt mist. We replaced the rollers with a heavy-duty aftermarket set, rebuilt the track channels, and realigned the frames. The owner could operate both windows one-handed afterward, and we recommended a yearly track cleaning to prevent another bind.
ES Windows Parts & Our Repair-vs-Replace Approach
We source OEM ES Windows hardware when it’s available for exact fit and finish. But the reality in West Palm Beach is that some ES Windows parts get discontinued or sit on backorder for weeks. When that happens, we use high-quality aftermarket rollers, gaskets, and operators that match the original specifications. We tell you which one we’re using and why before any work starts.
The repair-vs-replace decision comes down to a straight ROI comparison. If an aluminum frame is corroded beyond a section repair, or the insulated glass unit has failed, replacement cost often exceeds repair. We write out both options with real numbers and let you decide. No pressure, no upselling. If a $400 roller and track rebuild gets you another five years from a slider, we’ll say so. If you’re better off putting that money toward a new ES Windows 900 Series impact window, we’ll say that too. Call (728) 203-3270 and we’ll walk through what you’re dealing with.
Our ES Windows Service Process – Step by Step
- 1
Diagnosis. We inspect the window, identify the exact failure point, and check the surrounding frame, track, and seal condition. For ES Windows products, we pay particular attention to weep holes, corner welds, and gasket seating.
- 2
Repair or install. We quote a written price before any work starts. If you approve, we source the parts, schedule the work, and show up with shoe covers and drop cloths. The crew works clean and keeps the disruption minimal for kids and pets.
- 3
Testing. After the repair or installation, we cycle the window through its full range of motion, check the seal with a smoke pencil where needed, and verify drainage through the weep system.
- 4
Warranty and follow-up. Every completed ES Windows project carries our 365-Day Done Right Promise. If something’s not right within a year, we come back and make it right. We also photograph the clean-up before we leave, so you can see the condition we left the room in.
See the difference
Before
After
Before
After
Before
AfterES Windows Products We Service & Install in West Palm Beach
We work on the full ES Windows residential lineup. The 500 Series aluminum single-hung shows up most often in mid-century ranches and older West Palm Beach homes. The 700 Series aluminum casement is common in coastal condos where wind resistance matters. The 800 Series aluminum horizontal slider appears everywhere, from Flamingo Park bungalows to waterfront high-rises. The 900 Series impact-rated fixed picture window is the go-to for hurricane-rated new construction and retrofits.
We keep a local stock of common ES Windows parts: rollers, gaskets, operator arms, hinges, and weep hole covers. That means faster turnaround on routine repairs without waiting on a distributor shipment.
We Also Service These Brands
Elmstead Remodeling West Palm Beach installs and services named-brand products across the whole home. Beyond ES Windows, our crews work with KraftMaid cabinets, Cambria and Silestone countertops, and Kohler fixtures. If your ES Windows project is part of a larger remodel, we can handle the full scope with the same written-price commitment.
FAQs – ES Windows Construction Service in West Palm Beach
Why do my ES Windows aluminum frames show white crusty buildup near the bottom corners?
That white crust is salt and mineral deposit accumulating at the weep holes and corner joints, which is common in West Palm Beach homes near the Intracoastal and oceanfront. The weep holes are designed to drain water out of the frame channel, but salt mist and high humidity clog them. Trapped water accelerates corrosion, pitting the aluminum and eventually causing air leaks and seal failure. We clean the weep holes, remove the corrosion, and treat the frame to slow further damage. Call (728) 203-3270 if you’re seeing buildup on your frames, and we’ll assess whether it’s surface or structural.
Can you fix a fogged ES Windows insulated glass unit, or does the whole window need replacing?
The fogged IG unit itself can be replaced without changing the entire window. The insulated glass unit is sealed and filled with either air or inert gas. When the seal fails, moisture gets between the panes and fogs the glass. We order a replacement IGU to the original ES Windows specification and install it into the existing frame. This works on 500, 700, and 900 Series models as long as the frame is in good condition. If the frame is also corroded or damaged, we’ll compare the IGU replacement cost against a full window replacement before you spend a dollar.
My ES Windows 700 Series casement crank spins but the sash doesn’t move. What’s wrong?
That’s a stripped operator mechanism or a broken operator arm, which is one of the most common failures we see on 700 Series casements in West Palm Beach. Years of wind load and repeated operation grind down the internal gears until the crank turns without engaging. We replace the operator assembly and check the hinge alignment so the sash closes flush and seals against the weatherstripping. It’s a $300 – $700 repair depending on the specific operator type, and it’s done same-day in most cases.
Are ES Windows 900 Series impact windows worth keeping after a storm dented the frame?
If the frame is dented but the glass is intact and the window still operates and seals, we can often repair the frame section rather than replace the whole unit. Aluminum frame section repair runs $600 – $1,800 depending on the damage. If the dent compromised the structural integrity of the impact-rated assembly, replacement is the safer call. We’ll give you an honest assessment after inspecting the damage, including whether your home’s wind mitigation credits will be affected. Call (728) 203-3270 and we’ll schedule a look.
How often should I service my ES Windows sliders in West Palm Beach to prevent sticking?
We recommend yearly track cleaning and roller inspection for ES Windows 800 Series sliders, especially in homes within a mile of the Intracoastal or ocean. Salt and sand grit work into the tracks, grinding down rollers and pitting the aluminum. A yearly cleaning and lubrication costs a fraction of a $400 – $900 roller and track rebuild. Homes further inland can often go two years between service visits. It’s cheap maintenance that extends the life of the window significantly.
Is Elmstead Remodeling West Palm Beach authorized by ES Windows?
No, we are an independent ES Windows service provider and are not authorized by or affiliated with the manufacturer. We source OEM parts when available and use spec-matched aftermarket components when necessary. Our expertise comes from hands-on field experience in West Palm Beach, not manufacturer certification. If your windows are still under manufacturer warranty, we’ll let you know before any work begins so you can pursue a warranty claim if you prefer.
How much does ES Windows construction cost in West Palm Beach?
Here’s what our ES Windows services typically run in this market:
| Service | Price Range |
|---|---|
| 800 Series slider roller/track rebuild (per door) | $400 – $900 |
| 500 Series glazing gasket replacement (per window) | $200 – $500 |
| 700 Series casement operator replacement | $300 – $700 |
| Aluminum frame section repair | $600 – $1,800 |
| Full ES Windows replacement installation | $8,000 – $25,000 |
Every estimate is written before work starts, itemized by labor and materials, and never grows after the crew arrives. Call (728) 203-3270 for a free estimate on your specific windows.
Book Your ES Windows Service in West Palm Beach, FL
If your ES Windows are sticking, fogging, corroding, or just showing their age, we’ll take a look and give you a written price before any work starts. Call (728) 203-3270 to schedule your free estimate, and we’ll send out a technician who knows these windows the way only a West Palm Beach crew can.
Written by Graham Stein, Owner at Elmstead Remodeling West Palm Beach, offering Es Windows service in West Palm Beach since 2005.
